It would great if someone with the knowledge could take at look and see if they know why the 53115 switch is not detected so that this is a fully working device.
On 3 June 2016 at 12:45, Graham Fairweather <xotic...@gmail.com> wrote: > Hi and thanks. > > On 3 June 2016 at 12:07, Álvaro Fernández Rojas <nolt...@gmail.com> wrote: >> Hello Graham, >> >> Pulled into my staging tree with some changes (whitespace fixes, >> cleanups...): >> https://git.lede-project.org/?p=lede/noltari/staging.git;a=shortlog;h=refs/heads/brcm63xx-next >> >> Regards, >> Álvaro. >> >> El 23/5/16 a las 0:56, Xotic750 escribió: >>> From: Graham Fairweather <xotic...@gmail.com> >>> >>> This patch adds support for the Netgear EVG2000 VoIP Gateway to the >>> bcm63xx targets. >>> Ran 'make target/linux/refresh V=s' after update to kernel 4.4.10 from >>> 4.4.8 where the initial patch was added. >>> This device was not sold to the general public, but rather is/was >>> provided by telcos to customers in Sweden, Australia, Singapore and >>> other parts of asia. >>> System-On-Chip: Broadcom BCM6369 (2 * BMIPS4350 v3.1 / 400 MHz) >>> Flash size: 16 MiB >>> RAM size: 64 MiB >>> Wireless: BCM4322 802.11b/g/n (onboard) >>> Ethernet: Broadcom BCM53115 >>> USB: 2 x USB 2.0 >>> Known issues: >>> - Unable to detect 53115 switch. This appear to be a problem with >>> probing for the PHY using MDIO and results in error 5. Doesn't seem to >>> be a problem with the configuration, and could use someone with >>> experience to have a look at it. >>> - Uses the b43 driver as using the OpenWRT/LEDE broadcom-wl driver >>> fails to load the firmware for the 4322, so 802.11n is not supported. >>> The factory build uses a newer broadcom-wl driver. >>> - No support for the 2 VoIP ports (not attempted) >>> More info on the device and the research can be found at: >>> https://wiki.openwrt.org/toh/netgear/evg2000 >>> https://wikidevi.com/wiki/Netgear_EVG2000 >>> https://github.com/Xotic750/mirror-lede/tree/evg2000 >>> https://forum.openwrt.org/viewtopic.php?id=63950 >>> Signed-off-by: Graham Fairweather <xotic...@gmail.com> >>> --- >>> .../linux/brcm63xx/base-files/etc/board.d/01_leds | 7 ++ >>> .../brcm63xx/base-files/etc/board.d/02_network | 1 + >>> target/linux/brcm63xx/base-files/etc/diag.sh | 3 + >>> .../base-files/etc/uci-defaults/09_fix_crc | 2 +- >>> target/linux/brcm63xx/base-files/lib/brcm63xx.sh | 3 + >>> .../lib/preinit/05_init_interfaces_brcm63xx | 1 + >>> target/linux/brcm63xx/dts/evg2000.dts | 103 >>> +++++++++++++++++++++ >>> target/linux/brcm63xx/image/Makefile | 2 + >>> .../brcm63xx/patches-4.1/575-board_EVG2000.patch | 62 +++++++++++++ >>> ...-m25p80-use-parsers-if-provided-in-flash-.patch | 2 +- >>> ...CES-m25p80-add-support-for-limiting-reads.patch | 4 +- >>> .../414-MTD-m25p80-allow-passing-pp_data.patch | 2 +- >>> .../brcm63xx/patches-4.4/575-board_EVG2000.patch | 62 +++++++++++++ >>> target/linux/brcm63xx/profiles/netgear.mk | 10 ++ >>> 14 files changed, 259 insertions(+), 5 deletions(-) >>> create mode 100644 target/linux/brcm63xx/dts/evg2000.dts >>> create mode 100644 >>> target/linux/brcm63xx/patches-4.1/575-board_EVG2000.patch >>> create mode 100644 >>> target/linux/brcm63xx/patches-4.4/575-board_EVG2000.patch >>> >>> diff --git a/target/linux/brcm63xx/base-files/etc/board.d/01_leds >>> b/target/linux/brcm63xx/base-files/etc/board.d/01_leds >>> index 8339254..4163214 100755 >>> --- a/target/linux/brcm63xx/base-files/etc/board.d/01_leds >>> +++ b/target/linux/brcm63xx/base-files/etc/board.d/01_leds >>> @@ -24,6 +24,13 @@ dgnd3700v1_dgnd3800b) >>> ucidef_set_led_usbdev "usb1" "USB1" "DGND3700v1_3800B:green:usb-back" >>> "1-1" >>> ucidef_set_led_usbdev "usb2" "USB2" >>> "DGND3700v1_3800B:green:usb-front" "1-2" >>> ;; >>> +evg2000) >>> + ucidef_set_led_netdev "lan" "LAN" "EVG2000:green:lan" "eth0" >>> + ucidef_set_led_netdev "wan" "WAN" "EVG2000:green:wan" "eth1" >>> + ucidef_set_led_netdev "wlan0" "WIFI" "EVG2000:green:wireless" "wlan0" >>> + ucidef_set_led_usbdev "usb1" "USB1" "EVG2000:green:voip1" "1-1" >>> + ucidef_set_led_usbdev "usb2" "USB2" "EVG2000:green:voip2" "1-2" >>> + ;; >>> fast2704n) >>> ucidef_set_led_netdev "wan" "WAN" "F@ST2704N:green:inet" "eth0.2" >>> ;; >>> diff --git a/target/linux/brcm63xx/base-files/etc/board.d/02_network >>> b/target/linux/brcm63xx/base-files/etc/board.d/02_network >>> index f96da08..83367c1 100755 >>> --- a/target/linux/brcm63xx/base-files/etc/board.d/02_network >>> +++ b/target/linux/brcm63xx/base-files/etc/board.d/02_network >>> @@ -11,6 +11,7 @@ board_config_update >>> case "$(brcm63xx_board_name)" in >>> >>> cvg834g |\ >>> +evg2000 |\ >>> rta770bw |\ >>> rta770w |\ >>> spw303v |\ >>> diff --git a/target/linux/brcm63xx/base-files/etc/diag.sh >>> b/target/linux/brcm63xx/base-files/etc/diag.sh >>> index b864964..6ac2459 100644 >>> --- a/target/linux/brcm63xx/base-files/etc/diag.sh >>> +++ b/target/linux/brcm63xx/base-files/etc/diag.sh >>> @@ -70,6 +70,9 @@ set_state() { >>> dgnd3700v1_dgnd3800b) >>> status_led="DGND3700v1_3800B:green:power" >>> ;; >>> + evg2000) >>> + status_led="EVG2000:green:power" >>> + ;; >>> fast2504n) >>> status_led="fast2504n:green:ok" >>> ;; >>> diff --git a/target/linux/brcm63xx/base-files/etc/uci-defaults/09_fix_crc >>> b/target/linux/brcm63xx/base-files/etc/uci-defaults/09_fix_crc >>> index 70dbe2a..1201168 100644 >>> --- a/target/linux/brcm63xx/base-files/etc/uci-defaults/09_fix_crc >>> +++ b/target/linux/brcm63xx/base-files/etc/uci-defaults/09_fix_crc >>> @@ -21,6 +21,7 @@ case "$(brcm63xx_board_name)" in >>> cpva642 |\ >>> ct-6373 |\ >>> dsl-274xb-f |\ >>> + evg2000 |\ >>> hg622 |\ >>> magic |\ >>> p870hw-51a_v2 |\ >>> @@ -37,4 +38,3 @@ case "$(brcm63xx_board_name)" in >>> do_fixcrc >>> ;; >>> esac >>> - >>> diff --git a/target/linux/brcm63xx/base-files/lib/brcm63xx.sh >>> b/target/linux/brcm63xx/base-files/lib/brcm63xx.sh >>> index a2d6519..9cc0b2b 100755 >>> --- a/target/linux/brcm63xx/base-files/lib/brcm63xx.sh >>> +++ b/target/linux/brcm63xx/base-files/lib/brcm63xx.sh >>> @@ -183,6 +183,9 @@ brcm63xx_dt_detect() { >>> "Netgear DGND3700v1/DGND3800B") >>> board_name="dgnd3700v1_dgnd3800b" >>> ;; >>> + "Netgear EVG2000") >>> + board_name="evg2000" >>> + ;; >>> "NuCom R5010UN v2") >>> board_name="r5010un_v2" >>> ;; >>> diff --git >>> a/target/linux/brcm63xx/base-files/lib/preinit/05_init_interfaces_brcm63xx >>> b/target/linux/brcm63xx/base-files/lib/preinit/05_init_interfaces_brcm63xx >>> index 7e4dfcb..1e3fc14 100644 >>> --- >>> a/target/linux/brcm63xx/base-files/lib/preinit/05_init_interfaces_brcm63xx >>> +++ >>> b/target/linux/brcm63xx/base-files/lib/preinit/05_init_interfaces_brcm63xx >>> @@ -18,6 +18,7 @@ set_preinit_iface() { >>> dsl-274xb-c |\ >>> dsl-274xb-f |\ >>> dsl-275xb-d |\ >>> + evg2000 |\ >>> fast2504n |\ >>> fast2704v2 |\ >>> hg553 |\ >>> diff --git a/target/linux/brcm63xx/dts/evg2000.dts >>> b/target/linux/brcm63xx/dts/evg2000.dts >>> new file mode 100644 >>> index 0000000..04f7b84 >>> --- /dev/null >>> +++ b/target/linux/brcm63xx/dts/evg2000.dts >>> @@ -0,0 +1,103 @@ >>> +/dts-v1/; >>> + >>> +#include "bcm6368.dtsi" >>> + >>> +#include <dt-bindings/input/input.h> >>> + >>> +/ { >>> + model = "Netgear EVG2000"; >>> + compatible = "netgear,evg2000", "brcm,bcm6368"; >>> + >>> + gpio-keys-polled { >>> + compatible = "gpio-keys-polled"; >>> + #address-cells = <1>; >>> + #size-cells = <0>; >>> + poll-interval = <20>; >>> + debounce-interval = <60>; >>> + >>> + reset { >>> + label = "reset"; >>> + gpios = <&gpio0 25 1>; >>> + linux,code = <KEY_RESTART>; >>> + }; >>> + wps { >>> + label = "wps"; >>> + gpios = <&gpio0 26 1>; >>> + linux,code = <KEY_WPS_BUTTON>; >>> + }; >>> + }; >>> + >>> + gpio-leds { >>> + compatible = "gpio-leds"; >>> + >>> + voip1_green { >>> + label = "EVG2000:green:voip1"; >>> + gpios = <&gpio0 14 1>; >>> + }; >>> + voip2_green { >>> + label = "EVG2000:green:voip2"; >>> + gpios = <&gpio0 2 1>; >>> + }; >>> + inet_red { >>> + label = "EVG2000:red:inet"; >>> + gpios = <&gpio0 4 1>; >>> + }; >>> + inet_green { >>> + label = "EVG2000:green:inet"; >>> + gpios = <&gpio0 5 1>; >>> + }; >>> + usb_green { >>> + label = "EVG2000:green:usb"; >>> + gpios = <&gpio0 15 1>; >>> + }; >>> + power_green { >>> + label = "EVG2000:green:power"; >>> + gpios = <&gpio0 22 1>; >>> + default-state = "on"; >>> + }; >>> + power_red { >>> + label = "EVG2000:red:power"; >>> + gpios = <&gpio0 23 1>; >>> + }; >>> + lan_green { >>> + label = "EVG2000:green:lan"; >>> + gpios = <&gpio0 24 1>; >>> + }; >>> + wireless_green { >>> + label = "EVG2000:green:wireless"; >>> + gpios = <&gpio0 26 1>; >>> + }; >>> + wan_green { >>> + label = "EVG2000:green:wan"; >>> + gpios = <&gpio0 27 1>; >>> + }; >>> + }; >>> +}; >>> + >>> +&pflash { >>> + status = "ok"; >>> + >>> + linux,part-probe = "bcm63xxpart"; >>> + >>> + cfe@0 { >>> + label = "CFE"; >>> + reg = <0x00000000 0x00020000>; >>> + read-only; >>> + }; >>> + >>> + linux@20000 { >>> + label = "linux"; >>> + reg = <0x00020000 0x00f40000>; >>> + }; >>> + >>> + board_data@f60000 { >>> + label = "board_data"; >>> + reg = <0x00f60000 0x00080000>; >>> + read-only; >>> + }; >>> + >>> + nvram@fe0000 { >>> + label = "nvram"; >>> + reg = <0x00fe0000 0x00020000>; >>> + }; >>> +}; >>> diff --git a/target/linux/brcm63xx/image/Makefile >>> b/target/linux/brcm63xx/image/Makefile >>> index e00b6fb..f1fb86b 100644 >>> --- a/target/linux/brcm63xx/image/Makefile >>> +++ b/target/linux/brcm63xx/image/Makefile >>> @@ -593,6 +593,8 @@ $(eval $(call >>> bcm63xxCfeRamdisk,DG834GV4,DG834GTv4,dg834g_v4,96348W3,6348)) >>> $(eval $(call >>> bcm63xxCfeNetgear,DGND3700v1_3800B,DGND3700v1,dgnd3700v1,96368MVWG,6368,--image-offset >>> 0x20000 --block-size 0x20000,U12L144T01_NETGEAR_NEWLED,1)) >>> # Netgear DGND3800B >>> $(eval $(call >>> bcm63xxCfeNetgear,DGND3700v1_3800B,DGND3800B,dgnd3700v1,96368MVWG,6368,--image-offset >>> 0x20000 --block-size 0x20000,U12L144T11_NETGEAR_NEWLED,1)) >>> +# Netgear EVG2000 >>> +$(eval $(call >>> bcm63xxCfeNetgear,EVG2000,EVG2000,evg2000,96369PVG,6369,--image-offset >>> 0x20000 --block-size 0x20000,U12H154T90_NETGEAR,1)) >>> # NuCom R5010UNv2 >>> $(eval $(call bcm63xxCfe,R5010UNV2,R5010UNv2,r5010unv2,96328ang,6328,--pad >>> 8)) >>> # Pirelli Alice Gate VoIP 2 Plus Wi-Fi AGPF-S0 >>> diff --git a/target/linux/brcm63xx/patches-4.1/575-board_EVG2000.patch >>> b/target/linux/brcm63xx/patches-4.1/575-board_EVG2000.patch >>> new file mode 100644 >>> index 0000000..9339085 >>> --- /dev/null >>> +++ b/target/linux/brcm63xx/patches-4.1/575-board_EVG2000.patch >>> @@ -0,0 +1,62 @@ >>> +--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c >>> ++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c >>> +@@ -2010,6 +2010,43 @@ static struct board_info __initdata boar >>> + .num_spis = ARRAY_SIZE(DGND3700v1_3800B_spi_devices), >>> + }; >>> + >>> ++static struct sprom_fixup __initdata EVG2000_fixups[] = { >>> ++ { .offset = 219, .value = 0xec08 }, >>> ++}; >>> ++ >>> ++static struct board_info __initdata board_EVG2000 = { >>> ++ .name = "96369PVG", >>> ++ .expected_cpu_id = 0x6368, >>> ++ >>> ++ .has_uart0 = 1, >>> ++ .has_pci = 1, >>> ++ .has_ohci0 = 1, >>> ++ .has_ehci0 = 1, >>> ++ .num_usbh_ports = 2, >>> ++ >>> ++ .has_enetsw = 1, >>> ++ .enetsw = { >>> ++ .used_ports = { >>> ++ [5] = { >>> ++ .used = 1, >>> ++ .phy_id = 0xff, >>> ++ .bypass_link = 1, >>> ++ .force_speed = 1000, >>> ++ .force_duplex_full = 1, >>> ++ .name = "RGMII", >>> ++ }, >>> ++ }, >>> ++ }, >>> ++ .use_fallback_sprom = 1, >>> ++ .fallback_sprom = { >>> ++ .type = SPROM_BCM4322, >>> ++ .pci_bus = 0, >>> ++ .pci_dev = 1, >>> ++ .board_fixups = EVG2000_fixups, >>> ++ .num_board_fixups = >>> ARRAY_SIZE(EVG2000_fixups), >>> ++ }, >>> ++}; >>> ++ >>> + static struct board_info __initdata board_HG655b = { >>> + .name = "HW65x", >>> + .expected_cpu_id = 0x6368, >>> +@@ -2610,6 +2647,7 @@ static const struct board_info __initcon >>> + &board_96368mvwg, >>> + &board_96368mvngr, >>> + &board_DGND3700v1_3800B, >>> ++ &board_EVG2000, >>> + &board_HG622, >>> + &board_HG655b, >>> + &board_P870HW51A_V2, >>> +@@ -2722,6 +2760,7 @@ static struct of_device_id const bcm963x >>> + { .compatible = "huawei,hg622", .data = &board_HG622, }, >>> + { .compatible = "huawei,hg655b", .data = &board_HG655b, }, >>> + { .compatible = "netgear,dgnd3700v1", .data = >>> &board_DGND3700v1_3800B, }, >>> ++ { .compatible = "netgear,evg2000", .data = &board_EVG2000, }, >>> + { .compatible = "zyxel,p870hw-51a-v2", .data = &board_P870HW51A_V2, }, >>> + #endif >>> + #ifdef CONFIG_BCM63XX_CPU_63268 >>> diff --git >>> a/target/linux/brcm63xx/patches-4.4/202-MTD-DEVICES-m25p80-use-parsers-if-provided-in-flash-.patch >>> >>> b/target/linux/brcm63xx/patches-4.4/202-MTD-DEVICES-m25p80-use-parsers-if-provided-in-flash-.patch >>> index be62e67..4793836 100644 >>> --- >>> a/target/linux/brcm63xx/patches-4.4/202-MTD-DEVICES-m25p80-use-parsers-if-provided-in-flash-.patch >>> +++ >>> b/target/linux/brcm63xx/patches-4.4/202-MTD-DEVICES-m25p80-use-parsers-if-provided-in-flash-.patch >>> @@ -11,7 +11,7 @@ Signed-off-by: Jonas Gorski <jonas.gor...@gmail.com> >>> >>> --- a/drivers/mtd/devices/m25p80.c >>> +++ b/drivers/mtd/devices/m25p80.c >>> -@@ -229,7 +229,8 @@ static int m25p_probe(struct spi_device >>> +@@ -251,7 +251,8 @@ static int m25p_probe(struct spi_device >>> >>> ppdata.of_node = spi->dev.of_node; >>> >>> diff --git >>> a/target/linux/brcm63xx/patches-4.4/203-MTD-DEVICES-m25p80-add-support-for-limiting-reads.patch >>> >>> b/target/linux/brcm63xx/patches-4.4/203-MTD-DEVICES-m25p80-add-support-for-limiting-reads.patch >>> index 3877442..75a874d 100644 >>> --- >>> a/target/linux/brcm63xx/patches-4.4/203-MTD-DEVICES-m25p80-add-support-for-limiting-reads.patch >>> +++ >>> b/target/linux/brcm63xx/patches-4.4/203-MTD-DEVICES-m25p80-add-support-for-limiting-reads.patch >>> @@ -28,7 +28,7 @@ Signed-off-by: Jonas Gorski <jonas.gor...@gmail.com> >>> size_t *retlen, u_char *buf) >>> { >>> struct m25p *flash = nor->priv; >>> -@@ -152,6 +153,29 @@ static int m25p80_read(struct spi_nor *n >>> +@@ -174,6 +175,29 @@ static int m25p80_read(struct spi_nor *n >>> return 0; >>> } >>> >>> @@ -58,7 +58,7 @@ Signed-off-by: Jonas Gorski <jonas.gor...@gmail.com> >>> static int m25p80_erase(struct spi_nor *nor, loff_t offset) >>> { >>> struct m25p *flash = nor->priv; >>> -@@ -223,6 +247,9 @@ static int m25p_probe(struct spi_device >>> +@@ -245,6 +269,9 @@ static int m25p_probe(struct spi_device >>> else >>> flash_name = spi->modalias; >>> >>> diff --git >>> a/target/linux/brcm63xx/patches-4.4/414-MTD-m25p80-allow-passing-pp_data.patch >>> >>> b/target/linux/brcm63xx/patches-4.4/414-MTD-m25p80-allow-passing-pp_data.patch >>> index e421e9a..bbb565e 100644 >>> --- >>> a/target/linux/brcm63xx/patches-4.4/414-MTD-m25p80-allow-passing-pp_data.patch >>> +++ >>> b/target/linux/brcm63xx/patches-4.4/414-MTD-m25p80-allow-passing-pp_data.patch >>> @@ -10,7 +10,7 @@ Subject: [PATCH 64/79] MTD: m25p80: allow passing pp_data >>> >>> --- a/drivers/mtd/devices/m25p80.c >>> +++ b/drivers/mtd/devices/m25p80.c >>> -@@ -250,6 +250,9 @@ static int m25p_probe(struct spi_device >>> +@@ -272,6 +272,9 @@ static int m25p_probe(struct spi_device >>> if (data) >>> flash->max_transfer_len = data->max_transfer_len; >>> >>> diff --git a/target/linux/brcm63xx/patches-4.4/575-board_EVG2000.patch >>> b/target/linux/brcm63xx/patches-4.4/575-board_EVG2000.patch >>> new file mode 100644 >>> index 0000000..fc7afc7 >>> --- /dev/null >>> +++ b/target/linux/brcm63xx/patches-4.4/575-board_EVG2000.patch >>> @@ -0,0 +1,62 @@ >>> +--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c >>> ++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c >>> +@@ -2011,6 +2011,43 @@ static struct board_info __initdata boar >>> + .num_spis = ARRAY_SIZE(DGND3700v1_3800B_spi_devices), >>> + }; >>> + >>> ++static struct sprom_fixup __initdata EVG2000_fixups[] = { >>> ++ { .offset = 219, .value = 0xec08 }, >>> ++}; >>> ++ >>> ++static struct board_info __initdata board_EVG2000 = { >>> ++ .name = "96369PVG", >>> ++ .expected_cpu_id = 0x6368, >>> ++ >>> ++ .has_uart0 = 1, >>> ++ .has_pci = 1, >>> ++ .has_ohci0 = 1, >>> ++ .has_ehci0 = 1, >>> ++ .num_usbh_ports = 2, >>> ++ >>> ++ .has_enetsw = 1, >>> ++ .enetsw = { >>> ++ .used_ports = { >>> ++ [5] = { >>> ++ .used = 1, >>> ++ .phy_id = 0xff, >>> ++ .bypass_link = 1, >>> ++ .force_speed = 1000, >>> ++ .force_duplex_full = 1, >>> ++ .name = "RGMII", >>> ++ }, >>> ++ }, >>> ++ }, >>> ++ .use_fallback_sprom = 1, >>> ++ .fallback_sprom = { >>> ++ .type = SPROM_BCM4322, >>> ++ .pci_bus = 0, >>> ++ .pci_dev = 1, >>> ++ .board_fixups = EVG2000_fixups, >>> ++ .num_board_fixups = >>> ARRAY_SIZE(EVG2000_fixups), >>> ++ }, >>> ++}; >>> ++ >>> + static struct board_info __initdata board_HG655b = { >>> + .name = "HW65x", >>> + .expected_cpu_id = 0x6368, >>> +@@ -2611,6 +2648,7 @@ static const struct board_info __initcon >>> + &board_96368mvwg, >>> + &board_96368mvngr, >>> + &board_DGND3700v1_3800B, >>> ++ &board_EVG2000, >>> + &board_HG622, >>> + &board_HG655b, >>> + &board_P870HW51A_V2, >>> +@@ -2723,6 +2761,7 @@ static struct of_device_id const bcm963x >>> + { .compatible = "huawei,hg622", .data = &board_HG622, }, >>> + { .compatible = "huawei,hg655b", .data = &board_HG655b, }, >>> + { .compatible = "netgear,dgnd3700v1", .data = >>> &board_DGND3700v1_3800B, }, >>> ++ { .compatible = "netgear,evg2000", .data = &board_EVG2000, }, >>> + { .compatible = "zyxel,p870hw-51a-v2", .data = &board_P870HW51A_V2, }, >>> + #endif >>> + #ifdef CONFIG_BCM63XX_CPU_63268 >>> diff --git a/target/linux/brcm63xx/profiles/netgear.mk >>> b/target/linux/brcm63xx/profiles/netgear.mk >>> index bc345bb..e3bc34a 100644 >>> --- a/target/linux/brcm63xx/profiles/netgear.mk >>> +++ b/target/linux/brcm63xx/profiles/netgear.mk >>> @@ -41,3 +41,13 @@ define Profile/DGND3700v1_3800B/Description >>> Package set optimized for DGND3700 v1 / DGND3800B. >>> endef >>> $(eval $(call Profile,DGND3700v1_3800B)) >>> + >>> +define Profile/EVG2000 >>> + NAME:=Netgear EVG2000 >>> + PACKAGES:=kmod-b43 wpad-mini \ >>> + kmod-usb2 kmod-usb-ohci kmod-ledtrig-usbdev >>> +endef >>> +define Profile/EVG2000/Description >>> + Package set optimized for EVG2000. >>> +endef >>> +$(eval $(call Profile,EVG2000)) >> _______________________________________________ Lede-dev mailing list Lede-dev@lists.infradead.org http://lists.infradead.org/mailman/listinfo/lede-dev
