Hi Mathias, Just tried to boot a ramimage from tftp on vgv7519:
On my board: Bytes transferred = 7084442 (6c199a hex) ## Booting kernel from Legacy Image at 81000000 ... Image Name: MIPS OpenWrt Linux-3.10.49 Created: 2014-11-11 17:40:00 UTC Image Type: MIPS Linux Kernel Image (lzma compressed) Data Size: 7084378 Bytes = 6.8 MiB Load Address: 80002000 Entry Point: 80002000 Verifying Checksum ... OK Uncompressing Kernel Image ... LZMA: uncompress or overwrite error 7 - must RESET b ROM VER: 1.0.5 CFG 01 Any idea on how to fix this issue? Does you see it on other board? Regards On Thu, May 26, 2016 at 11:07 PM, Mathias Kresin <d...@kresin.me> wrote: > Beside cleaning up the device tree source file, this patch series fixes > the following issues: > > - second usb doesn't work > - switch not recognized by swconfig/no vlans > - no working UART bootable u-boot available > - only binary u-boot available/self compiled u-boot to big for partition > > The last remaining issue that couldn't be fixed so far, are three leds > which do not blink on network tx/rx with the R01 revision of the > VGV7519. > > This is related to a known bug of PEF 7071 v1.3 firmware. The firmware > counts the packages but doesn't trigger the led. To workaround the > issue it would be required to transfer control of the leds to the > switch by enabling the LED Externally Controlled Mode (ECM) of the phys. > > All patches have been tested during the last weeks by the OpenWrt Forum > users pe0fko and especially Timeless with both revision of the VGV7519. > > Mathias Kresin (9): > lantiq: VGV7519 - remove/merge redundant parts in dts > lantiq: VGV7519 - cleanup pinmux configuration > lantiq: VGV7519 - add second usb port > lantiq: VGV7519 - add vlan support > lantiq: VGV7519 - get mac address from board_config partition > lantiq: VGV7519 - fix brn partition layout > uboot-lantiq: vrx200 - add support for dual nor flash > uboot-lantiq: vrx200 - lzma compress gphy firmware > uboot-lantiq: Add Arcadyan VGV7519 support > > package/boot/uboot-lantiq/Makefile | 35 ++- > ...014-MIPS-add-support-for-Lantiq-XWAY-SoCs.patch | 74 ++++-- > .../0021-MIPS-vrx200-add-NAND-SPL-support.patch | 2 +- > ...PS-add-board-support-for-Arcadyan-VGV7519.patch | 288 > +++++++++++++++++++++ > .../linux/lantiq/base-files/etc/board.d/02_network | 3 +- > target/linux/lantiq/dts/VGV7519.dtsi | 83 +++--- > target/linux/lantiq/dts/VGV7519BRN.dts | 65 +++-- > target/linux/lantiq/dts/VGV7519NOR.dts | 18 -- > 8 files changed, 450 insertions(+), 118 deletions(-) > create mode 100644 > package/boot/uboot-lantiq/patches/0114-MIPS-add-board-support-for-Arcadyan-VGV7519.patch > > -- > 1.9.1 > _______________________________________________ Lede-dev mailing list Lede-dev@lists.infradead.org http://lists.infradead.org/mailman/listinfo/lede-dev
