For AR71XX devices, GMAC1 always connects port 0 of the built-in switch,
as the CPU port.
This patch sets correct vlan for some devices with wrong settings:
a) mark port 0 as CPU port, tagged
b) reverse port order, marking these ports untagged
Signed-off-by: Weijie Gao <hackpas...@gmail.com>
---
target/linux/ar71xx/base-files/etc/board.d/02_network | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/target/linux/ar71xx/base-files/etc/board.d/02_network
b/target/linux/ar71xx/base-files/etc/board.d/02_network
index 3ae35f1..45920d3 100755
--- a/target/linux/ar71xx/base-files/etc/board.d/02_network
+++ b/target/linux/ar71xx/base-files/etc/board.d/02_network
@@ -304,7 +304,7 @@ ar71xx_setup_interfaces()
wpn824n)
ucidef_set_interfaces_lan_wan "eth1.1" "eth0"
ucidef_add_switch "switch0" \
- "0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "4@eth1"
+ "0@eth1" "1:lan:1" "2:lan:2" "3:lan:3" "4:lan:4"
;;
dir-825-b1|\
nbg460n_550n_550nh|\
--
2.5.0
_______________________________________________
Lede-dev mailing list
Lede-dev@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/lede-dev
