2017-05-05 11:28 GMT+02:00 kysonlok <kyson...@gmail.com>: > This patch adds supports for the GL-inet GL-MT300N-V2. > > Specification: > - SoC: MediaTek MT7628AN > - Flash: 16 MiB (W25Q128FVSG) > - RAM: 128 MiB DDR > - Ethernet: 1 x WAN (100 Mbps) and 1 x LAN (100 Mbps) > - USB: 1 x USB 2.0 port > - Button: 1 x switch button, 1 x reset button > - LED: 3 x LEDS > - UART: 1 x UART on PCB (JP1: 3.3V, RX, TX, GND) > > Installation through Luci: > - The original firmware is LEDE, so both LuCI or sysupgrade can be used. > - Do not keep settings, for sysupgrade please use the -n option. > > Installation through bootloader webserver: > - Plug power and hold reset button until red LED blink to bright. > - Install sysupgrade image using web interface on 192.168.1.1. > > Signed-off-by: kysonlok <kyson...@gmail.com>
It seams to me you have missed my review of your patch. Would you please fix the issues I've outlined in http://lists.infradead.org/pipermail/lede-dev/2017-May/007293.html. Mathias _______________________________________________ Lede-dev mailing list Lede-dev@lists.infradead.org http://lists.infradead.org/mailman/listinfo/lede-dev