Hi Ram,
thanks for splitting the series up, i merged the first patches into my
tree, however the final patch fails to apply. could you rebase/resend
just that last one please ?
John
On 25/05/17 01:31, Ram Chandra Jangir wrote:
This change enables ubi image for IPQ40xx AP-DK04.1-C1
board, also add sysupgrage support for AP-DK04.1-C1 and
generates a sysupgrade.tar image.
Testing:
*Tested on IPQ40xx AP-DK04.1-C1:
a. NAND boot
b. ubi sysupgrade
Signed-off-by: Ram Chandra Jangir <rjan...@codeaurora.org>
---
Changes since v2:
*Splitted to individual patches
target/linux/ipq806x/base-files/lib/upgrade/platform.sh | 1 +
target/linux/ipq806x/image/Makefile | 1 +
2 files changed, 2 insertions(+)
diff --git a/target/linux/ipq806x/base-files/lib/upgrade/platform.sh
b/target/linux/ipq806x/base-files/lib/upgrade/platform.sh
index 8970285..fd08db3 100644
--- a/target/linux/ipq806x/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ipq806x/base-files/lib/upgrade/platform.sh
@@ -12,6 +12,7 @@ platform_pre_upgrade() {
case "$board" in
ap148 |\
+ ap-dk04.1-c1 |\
d7800 |\
nbg6817 |\
r7500 |\
diff --git a/target/linux/ipq806x/image/Makefile
b/target/linux/ipq806x/image/Makefile
index 6ebcde5..c49a73e 100644
--- a/target/linux/ipq806x/image/Makefile
+++ b/target/linux/ipq806x/image/Makefile
@@ -264,6 +264,7 @@ endef
define Device/AP-DK04.1-C1
$(call Device/FitImage)
+ $(call Device/UbiFit)
DEVICE_DTS := qcom-ipq4019-ap.dk04.1-c1
KERNEL_LOADADDR := 0x80208000
KERNEL_INSTALL := 1
_______________________________________________
Lede-dev mailing list
Lede-dev@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/lede-dev