> Hi All, > > I am facing an error where I can't find my USB or SD card and hence cant > upgrade to a new image. > > SD Card or USB device plugged in would be usually automounted at /tmp/mounts > But after sysupgrading to the latest LEDE image, the Omega2+ router detects > the USB device getting plugged in but doesnt display anywhere. Not even in > /dev/sdaX location. > > When I plugin a USB device, I get this message: > [ 6382.201671] usb 1-1: new high-speed USB device number 3 using ehci-platform > > root@Omega-FB25:/# ls /dev/ > bus mtd5ro ttyS1 > console mtd6 ttyS10 > cpu_dma_latency mtd6ro ttyS11 > full mtdblock0 ttyS12 > hwrng mtdblock1 ttyS13 > kmsg mtdblock2 ttyS14 > log mtdblock3 ttyS15 > memory_bandwidth mtdblock4 ttyS2 > mmcblk0 mtdblock5 ttyS3 > mmcblk0p1 mtdblock6 ttyS4 > mtd0 network_latency ttyS5 > mtd0ro network_throughput ttyS6 > mtd1 null ttyS7 > mtd1ro port ttyS8 > mtd2 ppp ttyS9 > mtd2ro ptmx urandom > mtd3 pts watchdog > mtd3ro random watchdog0 > mtd4 shm zero > mtd4ro tty > mtd5 ttyS0 > root@Omega-FB25:/# dmesg | grep usb > [ 2.584787] usbcore: registered new interface driver usbfs > [ 2.590508] usbcore: registered new interface driver hub > [ 2.596060] usbcore: registered new device driver usb > [ 2.630320] phy phy-10120000.usbphy.0: remote usb device wakeup disabled > [ 2.637134] phy phy-10120000.usbphy.0: UTMI 16bit 30MHz > [ 3.118388] usb 1-1: new high-speed USB device number 2 using ehci-platform > [ 6377.744209] usb 1-1: USB disconnect, device number 2 > [ 6382.201671] usb 1-1: new high-speed USB device number 3 using ehci-platform > > root@Omega-FB25:/# df -h > Filesystem Size Used Available Use% Mounted on > /dev/root 2.5M 2.5M 0 100% /rom > tmpfs 61.5M 56.0K 61.5M 0% /tmp > /dev/mtdblock6 28.3M 820.0K 27.4M 3% /overlay > overlayfs:/overlay 28.3M 820.0K 27.4M 3% / > tmpfs 512.0K 0 512.0K 0% /dev > root@Omega-FB25:/# cd /tmp/mounts > /bin/ash: cd: can't cd to /tmp/mounts > > Tried with both USB 1 and USB 2.0 devices. So tried to connect to Wifi and > download new image. But iwconfig is not working. > > root@Omega-FB25:/# iwconfig > /bin/ash: iwconfig: not found > > Note: This was working fine earlier and I did multiple image swaps between my > personal built ones and official images. I upgraded image from Omega2+ image > to LEDE image[1]. > > Any suggestions on how to overcome this would be helpful. > > [1] > https://downloads.lede-project.org/releases/17.01.1/targets/ramips/mt7688/lede-17.01.1-ramips-mt7688-omega2p-squashfs-sysupgrade.bin > > Thanks, > Arun
_______________________________________________ Lede-dev mailing list Lede-dev@lists.infradead.org http://lists.infradead.org/mailman/listinfo/lede-dev