The sender domain has a DMARC Reject/Quarantine policy which disallows
sending mailing list messages using the original "From" header.
To mitigate this problem, the original message has been wrapped
automatically by the mailing list software.
--- Begin Message ---
2017-07-21 19:48, Nerijus Baliūnas via Lede-dev rašė:
How do I configure vlan? Here I changed eth0 to eth0.1:
config interface 'lan'
option type 'bridge'
option ifname 'eth0.1'
option proto 'static'
option ipaddr '192.168.1.1'
option netmask '255.255.255.0'
option ip6assign '60'
I tried
config 'switch' 'eth0'
option 'enable' '1'
option 'enable_vlan' '1'
option 'reset' '1'
config 'switch_vlan'
option 'vlan' '1'
option 'device' 'eth0'
option 'ports' '1 2 3 4 5t'
config 'switch_vlan'
option 'vlan' '2'
option 'device' 'eth0'
option 'ports' '0 5t'
Does not work. Do I need to have swconfig installed in order to
get the switch working? Because by default it is not installed.
Thanks,
Nerijus
--- End Message ---
_______________________________________________
Lede-dev mailing list
Lede-dev@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/lede-dev