From: Sergey Sergeev <ad...@yapic.net> Changes the platform to use the Chipidea driver instead of the generic USB host driver which has support for both host and device modes (selected on boot) for QCA953x based boards.
It was tested on GL.iNet GL-AR300M with USB DEVICE mode config. More details is available here: https://github.com/adron-s/QCA953x-usb-device-mode Signed-off-by: Sergey Sergeev <ad...@yapic.net> --- ...940-usb-chipidea-QCA953x-platform-support.patch | 87 ++++++++++++++++++++++ 1 file changed, 87 insertions(+) create mode 100644 target/linux/ar71xx/patches-4.4/940-usb-chipidea-QCA953x-platform-support.patch diff --git a/target/linux/ar71xx/patches-4.4/940-usb-chipidea-QCA953x-platform-support.patch b/target/linux/ar71xx/patches-4.4/940-usb-chipidea-QCA953x-platform-support.patch new file mode 100644 index 0000000..a3e2509 --- /dev/null +++ b/target/linux/ar71xx/patches-4.4/940-usb-chipidea-QCA953x-platform-support.patch @@ -0,0 +1,87 @@ +--- a/arch/mips/ath79/dev-usb.c ++++ b/arch/mips/ath79/dev-usb.c +@@ -286,6 +286,51 @@ + &ath79_ehci_pdata_v2, sizeof(ath79_ehci_pdata_v2)); + } + ++#if IS_ENABLED(CONFIG_USB_CHIPIDEA) ++static void __init qca953x_usb_setup_ctrl_config(void) ++{ ++ void __iomem *usb_ctrl_base, *usb_config_reg; ++ u32 usb_config; ++ ++ usb_ctrl_base = ioremap(AR71XX_USB_CTRL_BASE, AR71XX_USB_CTRL_SIZE); ++ usb_config_reg = usb_ctrl_base + AR71XX_USB_CTRL_REG_CONFIG; ++ usb_config = __raw_readl(usb_config_reg); ++ usb_config &= ~QCA953X_USB_CONFIG_HOST_ONLY; ++ __raw_writel(usb_config, usb_config_reg); ++ iounmap(usb_ctrl_base); ++} ++ ++static void __init qca953x_ci_usb_setup(u32 bootstrap) ++{ ++ enum usb_dr_mode dr_mode; ++ struct ci_hdrc_platform_data ci_pdata; ++ ++ if (bootstrap & QCA953X_BOOTSTRAP_USB_MODE_DEVICE) { ++ dr_mode = USB_DR_MODE_PERIPHERAL; ++ qca953x_usb_setup_ctrl_config(); ++ } else { ++ dr_mode = USB_DR_MODE_HOST; ++ } ++ ++ memset(&ci_pdata, 0, sizeof(ci_pdata)); ++ ci_pdata.name = "ci_hdrc_qca953x"; ++ ci_pdata.capoffset = DEF_CAPOFFSET; ++ ci_pdata.dr_mode = dr_mode; ++ ci_pdata.flags = CI_HDRC_DUAL_ROLE_NOT_OTG | CI_HDRC_DP_ALWAYS_PULLUP; ++ ci_pdata.vbus_extcon.edev = ERR_PTR(-ENODEV); ++ ci_pdata.id_extcon.edev = ERR_PTR(-ENODEV); ++ ci_pdata.itc_setting = 1; ++ ++ platform_device_register_simple("usb_phy_generic", ++ PLATFORM_DEVID_AUTO, NULL, 0); ++ ++ ath79_usb_register("ci_hdrc", -1, ++ QCA953X_EHCI_BASE, QCA953X_EHCI_SIZE, ++ ATH79_CPU_IRQ(3), ++ &ci_pdata, sizeof(ci_pdata)); ++} ++#endif ++ + static void __init qca953x_usb_setup(void) + { + u32 bootstrap; +@@ -304,10 +349,14 @@ + ath79_device_reset_clear(QCA953X_RESET_USB_HOST); + udelay(1000); + ++#if IS_ENABLED(CONFIG_USB_CHIPIDEA) ++ qca953x_ci_usb_setup(bootstrap); ++#else + ath79_usb_register("ehci-platform", -1, + QCA953X_EHCI_BASE, QCA953X_EHCI_SIZE, + ATH79_CPU_IRQ(3), + &ath79_ehci_pdata_v2, sizeof(ath79_ehci_pdata_v2)); ++#endif + } + + static void qca955x_usb_reset_notifier(struct platform_device *pdev) +--- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h ++++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h +@@ -660,6 +660,7 @@ + #define AR933X_BOOTSTRAP_MDIO_GPIO_EN BIT(18) + #define AR933X_BOOTSTRAP_EEPBUSY BIT(4) + #define AR933X_BOOTSTRAP_USB_MODE_HOST BIT(3) ++#define QCA953X_BOOTSTRAP_USB_MODE_DEVICE BIT(7) + #define AR933X_BOOTSTRAP_REF_CLK_40 BIT(0) + + #define AR934X_BOOTSTRAP_SW_OPTION8 BIT(23) +@@ -690,6 +691,7 @@ + #define QCA956X_BOOTSTRAP_REF_CLK_40 BIT(2) + + #define AR933X_USB_CONFIG_HOST_ONLY BIT(8) ++#define QCA953X_USB_CONFIG_HOST_ONLY BIT(4) + + #define AR934X_PCIE_WMAC_INT_WMAC_MISC BIT(0) + #define AR934X_PCIE_WMAC_INT_WMAC_TX BIT(1) -- 2.7.4 _______________________________________________ Lede-dev mailing list Lede-dev@lists.infradead.org http://lists.infradead.org/mailman/listinfo/lede-dev