currenlty U-Boot/Default supports only at91 legacy devices.To add sama5 support, moving BUILD_SUBTARGET from U-Boot/Default to target devices.
Signed-off-by: Sandeep Sheriker Mallikarjun <sandeepsheriker.mallikar...@microchip.com> --- package/boot/uboot-at91/Makefile | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/package/boot/uboot-at91/Makefile b/package/boot/uboot-at91/Makefile index 6a806ff..68e4ba4 100644 --- a/package/boot/uboot-at91/Makefile +++ b/package/boot/uboot-at91/Makefile @@ -17,16 +17,17 @@ include $(INCLUDE_DIR)/package.mk define U-Boot/Default BUILD_TARGET:=at91 - BUILD_SUBTARGET:=legacy UBOOT_IMAGE:=u-boot.bin boot.bin endef define U-Boot/at91sam9m10g45ek_nandflash NAME:=AT91SAM9M10G45-EK board (NandFlash) + BUILD_SUBTARGET:=legacy endef define U-Boot/at91sam9x5ek_nandflash NAME:=AT91SAM9X5-EK board (NandFlash) + BUILD_SUBTARGET:=legacy endef UBOOT_TARGETS := \ -- 2.7.4 _______________________________________________ Lede-dev mailing list Lede-dev@lists.infradead.org http://lists.infradead.org/mailman/listinfo/lede-dev