This is pretty much the same as the ALL0256N-8M but with different LED settings.
Based on Matt Jenkins' patch, with additional reworks. https://github.com/openwrt/openwrt/pull/491 Signed-off-by: Zoltan HERPAI <wigy...@uid0.hu> --- target/linux/ramips/base-files/etc/board.d/01_leds | 7 ++ .../linux/ramips/base-files/etc/board.d/02_network | 1 + target/linux/ramips/base-files/lib/ramips.sh | 3 + .../ramips/base-files/lib/upgrade/platform.sh | 1 + target/linux/ramips/dts/MT2681.dts | 106 +++++++++++++++++++++ target/linux/ramips/image/rt305x.mk | 7 ++ 6 files changed, 125 insertions(+) create mode 100644 target/linux/ramips/dts/MT2681.dts diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds b/target/linux/ramips/base-files/etc/board.d/01_leds index 75ab0da..525c32b 100755 --- a/target/linux/ramips/base-files/etc/board.d/01_leds +++ b/target/linux/ramips/base-files/etc/board.d/01_leds @@ -55,6 +55,13 @@ air3gii) set_wifi_led "$board:green:wlan" set_usb_led "$board:green:mobile" ;; +mt2681) + ucidef_set_rssimon "wlan0" "40000" "1" + ucidef_set_led_rssi "rssilow" "RSSILOW" "$board:green:rssilow" "wlan0" "1" "40" "0" "6" + ucidef_set_led_rssi "rssimedium" "RSSIMEDIUM" "$board:green:rssimed" "wlan0" "30" "80" "-29" "5" + ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "$board:green:rssihigh" "wlan0" "70" "100" "-69" "8" + set_wifi_led "rt2800pci-phy0::radio" + ;; all0256n-4M|\ all0256n-8M) ucidef_set_rssimon "wlan0" "200000" "1" diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network index 1c8505e..101c97e 100755 --- a/target/linux/ramips/base-files/etc/board.d/02_network +++ b/target/linux/ramips/base-files/etc/board.d/02_network @@ -53,6 +53,7 @@ ramips_setup_interfaces() m2m|\ microwrt|\ mpr-a2|\ + mt2681|\ ncs601w|\ omega2 | \ omega2p | \ diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh index 07e776c..e451b0e 100755 --- a/target/linux/ramips/base-files/lib/ramips.sh +++ b/target/linux/ramips/base-files/lib/ramips.sh @@ -331,6 +331,9 @@ ramips_board_detect() { *"MR200") name="mr200" ;; + *"MT2681") + name="mt2681" + ;; *"MT7620a + MT7530 evaluation"*) name="mt7620a_mt7530" ;; diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh index 99ebe35..5430be7 100755 --- a/target/linux/ramips/base-files/lib/upgrade/platform.sh +++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh @@ -98,6 +98,7 @@ platform_check_image() { mpr-a1|\ mpr-a2|\ mr-102n|\ + mt2681|\ mt7628|\ mzk-750dhp|\ mzk-dp150n|\ diff --git a/target/linux/ramips/dts/MT2681.dts b/target/linux/ramips/dts/MT2681.dts new file mode 100644 index 0000000..634e8c8 --- /dev/null +++ b/target/linux/ramips/dts/MT2681.dts @@ -0,0 +1,106 @@ +/dts-v1/; + +#include "rt3050.dtsi" + +/ { + compatible = "ralink,rt3050-soc"; + model = "Devolo WiFi Extender MT2681"; + + gpio-leds { + compatible = "gpio-leds"; + + rssilow { + label = "mt2681:green:rssilow"; + gpios = <&gpio0 7 1>; + }; + + rssimed { + label = "mt2681:green:rssimed"; + gpios = <&gpio0 11 1>; + }; + + rssihigh { + label = "mt2681:green:rssihigh"; + gpios = <&gpio0 12 1>; + }; + + wifi { + label = "mt2681:red:wifi"; + gpios = <&gpio0 9 1>; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <20>; + + reset { + label = "reset"; + gpios = <&gpio0 10 1>; + linux,code = <0x198>; + }; + }; +}; + +&gpio0 { + status = "okay"; +}; + +&spi0 { + status = "okay"; + + m25p80@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + reg = <0>; + linux,modalias = "m25p80", "mx25l3205d"; + spi-max-frequency = <10000000>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "u-boot-env"; + reg = <0x30000 0x10000>; + read-only; + }; + + factory: partition@40000 { + label = "factory"; + reg = <0x40000 0x10000>; + read-only; + }; + + partition@50000 { + label = "firmware"; + reg = <0x50000 0x7b0000>; + }; + }; +}; + +&pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf"; + ralink,function = "gpio"; + }; + }; +}; + +ðernet { + mtd-mac-address = <&factory 0x28>; +}; + +&esw { + mediatek,portmap = <0x3f>; +}; + +&wmac { + ralink,mtd-eeprom = <&factory 0>; +}; \ No newline at end of file diff --git a/target/linux/ramips/image/rt305x.mk b/target/linux/ramips/image/rt305x.mk index 4e82eb4..d7093fb 100644 --- a/target/linux/ramips/image/rt305x.mk +++ b/target/linux/ramips/image/rt305x.mk @@ -485,6 +485,13 @@ define Device/mpr-a2 endef TARGET_DEVICES += mpr-a2 +define Device/mt2681 + DTS := MT2681 + DEVICE_TITLE := Devolo WiFi Extender MT2681 + DEVICE_PACKAGES := rssileds +endef +TARGET_DEVICES += mt2681 + define Device/mr-102n DTS := MR-102N DEVICE_TITLE := AXIMCom MR-102N -- 1.9.1 _______________________________________________ Lede-dev mailing list Lede-dev@lists.infradead.org http://lists.infradead.org/mailman/listinfo/lede-dev