Hi, On Sun, Nov 5, 2017 at 1:47 PM, Kristian Evensen <kristian.even...@gmail.com> wrote: > By the way, I sometimes see the board cough up different > memory-related errors. For example, I have seen seg. faults for > applications that are run on startup, messages like "CPU 3 Unable to > handle kernel paging request at virtual address 1fffff9c, epc == > 80109d2c, ra == 8010a548" and "page dumped because: nonzero _count". I > have compared the memory layout, etc. of LEDE to that of the factory > firmware and it all seems to match up. Do you have any ideas what > might be wrong? I did a search and found some similar ramips-related > issues, but they all seem to have dealt with.
Please ignore this one, as the problem seems to be caused by faulty hardware. I have two boards and one always displays these errors after ~5 reboots, while the other has now survived 20+ reboots and re-flashes. Now that I was looking for these errors, I also see them when using the factory firmware. -Kristian _______________________________________________ Lede-dev mailing list Lede-dev@lists.infradead.org http://lists.infradead.org/mailman/listinfo/lede-dev