Here is the VID:PID of the MC7430, if it helps. Bus 001 Device 002: ID 1199:9071 Sierra Wireless, Inc.
> On 30 Nov 2017, at 1:49 pm, Nicholas Smith <smith.nicholas...@gmail.com> > wrote: > > Hi Koen, > > I would like to report that it is attempting, but it is unable to change > /sys/class/wwan0/qmi/raw_ip to a “Y” on it’s own. I have to bring the > interface down myself, set raw_ip to Y, then bring it back up. Manual, but > it works every time. > > [ 40.455550] qmi_wwan 1-2:1.8 wwan0: Cannot change a running device > > Here’s what I do to work around: > > In LuCI go to wwan0 and stop the interface. > echo “Y” > /sys/class/wwan0/qmi/raw_ip > In LuCI go to wwan0 and connect the interface. > > > >> On 28 Nov 2017, at 6:27 pm, Koen Vandeputte <koen.vandepu...@ncentric.com> >> wrote: >> >> >> >> On 2017-11-27 23:38, Nicholas Smith wrote: >>> Hi! >>> >>> Will this also apply to the Sierra MC7430, as it is also raw-ip only? If I >>> am not mistaken it is the same as the MC7455, just for the Asia/Pacific >>> region. I would be able to verify this patch on the device. To verify >>> that it works, do I just look for /sys/class/net/$ifname/qmi/raw_ip ? >>> >>> Nicholas >>> smith.nicholas...@gmail.com >>> >> <snip> >> >> Judging by the datasheet compared to the MC7455 and some other resources >> online: most likely yes. >> Keep in mind that this will not work on the 17.01 branch as kernel 4.5 or >> better is required which contains the needed driver parts and fixes. >> >> If you would like to evaluate, please use master branch. >> >> Testing the patch in full checking connectivity is always better than just >> checking if that particular file is present. >> You should see a print referring to raw-ip popping up using logread. (see >> patch contents) >> >> >> Regards, >> >> Koen > _______________________________________________ Lede-dev mailing list Lede-dev@lists.infradead.org http://lists.infradead.org/mailman/listinfo/lede-dev