The sender domain has a DMARC Reject/Quarantine policy which disallows sending mailing list messages using the original "From" header.
To mitigate this problem, the original message has been wrapped automatically by the mailing list software.
--- Begin Message ---Hi guys, I am currently in the process of porting a new device (https://wiki.openwrt.org/inbox/engenius/engenius_emr3000v2) over to OpenWRT. The issue I am facing is that mtdsplit works fine with kernel 4.4 [ 0.903158] m25p80 spi0.0: found s25fl256s1, expected m25p80 [ 0.908907] m25p80 spi0.0: s25fl256s1 (32768 Kbytes) [ 0.913994] 7 cmdlinepart partitions found on MTD device spi0.0 [ 0.919997] Creating 7 MTD partitions on "spi0.0": [ 0.924872] 0x000000000000-0x000000040000 : "u-boot" [ 0.931890] 0x000000040000-0x000000050000 : "u-boot-env" [ 0.938698] 0x000000050000-0x000000060000 : "art" [ 0.944885] 0x000000060000-0x0000001c0000 : "kernel" [ 0.951259] 0x0000001c0000-0x000001fb0000 : "rootfs" [ 0.957707] mtd: device 4 (rootfs) set to be root filesystem [ 0.963597] 1 squashfs-split partitions found on MTD device rootfs [ 0.969875] 0x000000440000-0x000001fb0000 : "rootfs_data" [ 0.976779] 0x000001fb0000-0x000002000000 : "config" [ 0.983224] 0x000000060000-0x000001fb0000 : "firmware" but fails with this on 4.9: [ 0.951402] m25p80 spi0.0: found s25fl256s1, expected m25p80 [ 0.957203] m25p80 spi0.0: s25fl256s1 (32768 Kbytes) [ 0.962266] 7 cmdlinepart partitions found on MTD device spi0.0 [ 0.968277] Creating 7 MTD partitions on "spi0.0": [ 0.973141] 0x000000000000-0x000000040000 : "u-boot" [ 0.979849] 0x000000040000-0x000000050000 : "u-boot-env" [ 0.986630] 0x000000050000-0x000000060000 : "art" [ 0.992712] 0x000000060000-0x0000001c0000 : "kernel" [ 0.999136] 0x0000001c0000-0x000001fb0000 : "rootfs" [ 1.005551] mtd: device 4 (rootfs) set to be root filesystem [ 1.011311] mtdsplit: error occured while reading from "rootfs" [ 1.017348] 0x000001fb0000-0x000002000000 : "config" [ 1.023717] 0x000000060000-0x000001fb0000 : "firmware" My patches are available at https://github.com/bk138/source/tree/emr3000-wip and prefixed with "emr3k:". Anyone any hints on what I might be missing? Could it be that the way to generate a sysupgrade image has changed? Here's what I'm using for emr3000 (and what works with 4.4): https://github.com/bk138/source/blob/emr3000-wip/target/linux/ar71xx/image/senao.mk Thanks in advance, Christian
--- End Message ---
_______________________________________________ Lede-dev mailing list Lede-dev@lists.infradead.org http://lists.infradead.org/mailman/listinfo/lede-dev