2) also worked for me. Thanks
On Mon, May 5, 2014 at 9:47 AM, Hans Erik van Elburg < hanserik.van.elb...@gmail.com> wrote: > Thanks Thierry, > > 2) worked for me. > > BR, > /Hans Erik > > Op zondag 4 mei 2014 11:35:39 UTC+2 schreef thierry: > >> 1) >> >> Here is what I did >> >> - install virtualbox >> - download ubuntu 14.04 and install it into virtualbox >> - sudo apt-get update && sudo apt-get upgrade (inside the VM) >> - and then pursue with my previous post (inside the VM) >> >> I did the whole process twice, so I have some self-assurance that my >> trick works on *vanilla* ubuntu 14.04. >> >> But today, I just tried to compile ledger using the same process as >> described in email above, but without installing again the VM. And it >> fails... >> >> 2) >> >> But after several trials and errors, I found that the below commands >> worked for me. >> >> rm -rf ledger/ >> git clone git://github.com/ledger/ledger.git >> cd ledger/ >> git submodule update --init >> cmake . -DUSE_DOXYGEN=1 -DUSE_PYTHON=1 >> make >> >> I can see that the above commands are skipping the step "Generating >> ../system.hh.pch". Perhaps system.hh.pch is what is making the compilation >> to fail ? >> >> 3) >> >> I also believe there is something wrong with system.hh.pch, because of >> the following. >> I have tried to switch to clang (I do not know the proper way, I only set >> CXX). >> I have an error also related to system.hh.pch. >> >> >> Thierry >> >> >> ----------8<--------------------8<--------------------8<---------- >> >> $ rm -rf ledger/ >> $ git clone git://github.com/ledger/ledger.git >> $ cd ledger/ >> $ export CXX=clang >> >> $ ./acprep --verbose update >> acprep: INFO: Invoking primary phase: update >> acprep: INFO: Executing phase: update >> acprep: INFO: Executing phase: pull >> Already up-to-date. >> acprep: INFO: Executing phase: submodule >> Sous-module 'lib/utfcpp' (http://github.com/ledger/utfcpp.git) >> enregistré pour le chemin 'lib/utfcpp' >> Clonage dans 'lib/utfcpp'... >> remote: Reusing existing pack: 37, done. >> remote: Total 37 (delta 0), reused 0 (delta 0) >> Unpacking objects: 100% (37/37), done. >> Vérification de la connectivité... fait. >> Chemin de sous-module 'lib/utfcpp' : >> '2233ec933f5661c7050b94d3b14f5f9f51ae3d55' >> extrait >> acprep: INFO: Executing phase: make >> acprep: INFO: Executing phase: config >> acprep: INFO: Executing phase: submodule >> acprep: INFO: Executing phase: configure >> acprep: INFO: System type is => Linux >> acprep: INFO: Setting up build flavor => debug >> -- The C compiler identification is GNU 4.8.2 >> -- The CXX compiler identification is Clang 3.4.0 >> -- Check for working C compiler: /usr/bin/cc >> -- Check for working C compiler: /usr/bin/cc -- works >> -- Detecting C compiler ABI info >> -- Detecting C compiler ABI info - done >> -- Check for working CXX compiler: /usr/bin/clang >> -- Check for working CXX compiler: /usr/bin/clang -- works >> -- Detecting CXX compiler ABI info >> -- Detecting CXX compiler ABI info - done >> -- Found PythonInterp: /usr/bin/python (found version "2.7.6") >> -- Boost version: 1.55.0 >> -- Found the following Boost libraries: >> -- date_time >> -- filesystem >> -- system >> -- iostreams >> -- regex >> -- unit_test_framework >> -- Looking for access >> -- Looking for access - found >> -- Looking for realpath >> -- Looking for realpath - found >> -- Looking for getpwuid >> -- Looking for getpwuid - found >> -- Looking for getpwnam >> -- Looking for getpwnam - found >> -- Looking for isatty >> -- Looking for isatty - found >> -- Performing Test UNIX_PIPES_COMPILES >> -- Performing Test UNIX_PIPES_COMPILES - Success >> -- Performing Test BOOST_REGEX_UNICODE_RUNS >> -- Performing Test BOOST_REGEX_UNICODE_RUNS - Failed >> -- Looking for readline in edit >> -- Looking for readline in edit - found >> -- Configuring done >> -- Generating done >> -- Build files have been written to: /home/thierry/ledger >> /usr/bin/cmake -H/home/thierry/ledger -B/home/thierry/ledger >> --check-build-system CMakeFiles/Makefile.cmake 0 >> /usr/bin/cmake -E cmake_progress_start /home/thierry/ledger/CMakeFiles >> /home/thierry/ledger/CMakeFiles/progress.marks >> make -f CMakeFiles/Makefile2 all >> make[1]: entrant dans le répertoire « /home/thierry/ledger » >> make -f src/CMakeFiles/libledger.dir/build.make >> src/CMakeFiles/libledger.dir/depend >> make[2]: entrant dans le répertoire « /home/thierry/ledger » >> /usr/bin/cmake -E cmake_progress_report /home/thierry/ledger/CMakeFiles >> 10 >> [ 1%] Generating ../system.hh.pch >> cd /home/thierry/ledger/src && rm -f /home/thierry/ledger/system.hh.pch >> cd /home/thierry/ledger/src && /usr/bin/clang -g -fPIC -x c++-header -c >> /home/thierry/ledger/system.hh -o /home/thierry/ledger/system.hh.pch >> -isystem /usr/include -isystem /usr/include/x86_64-linux-gnu -isystem >> /usr/include -isystem /usr/include -isystem /home/thierry/ledger/lib >> -isystem /home/thierry/ledger/lib/utfcpp/source -isystem >> /home/thierry/ledger >> cd /home/thierry/ledger && /usr/bin/cmake -E cmake_depends "Unix >> Makefiles" /home/thierry/ledger /home/thierry/ledger/src >> /home/thierry/ledger /home/thierry/ledger/src /home/thierry/ledger/src/ >> CMakeFiles/libledger.dir/DependInfo.cmake --color= >> Dependee "/home/thierry/ledger/src/CMakeFiles/libledger.dir/DependInfo.cmake" >> is newer than depender "/home/thierry/ledger/src/ >> CMakeFiles/libledger.dir/depend.internal". >> Dependee >> "/home/thierry/ledger/src/CMakeFiles/CMakeDirectoryInformation.cmake" >> is newer than depender "/home/thierry/ledger/src/ >> CMakeFiles/libledger.dir/depend.internal". >> Scanning dependencies of target libledger >> make[2]: quittant le répertoire « /home/thierry/ledger » >> make -f src/CMakeFiles/libledger.dir/build.make >> src/CMakeFiles/libledger.dir/build >> make[2]: entrant dans le répertoire « /home/thierry/ledger » >> /usr/bin/cmake -E cmake_progress_report /home/thierry/ledger/CMakeFiles >> 11 >> [ 3%] Building CXX object src/CMakeFiles/libledger.dir/stats.cc.o >> cd /home/thierry/ledger/src && /usr/bin/clang -Dlibledger_EXPORTS -g >> -fPIC -isystem /usr/include/x86_64-linux-gnu -I/home/thierry/ledger/lib >> -I/home/thierry/ledger/lib/utfcpp/source -I/home/thierry/ledger >> -std=c++11 -Weverything -Wno-disabled-macro-expansion -Wno-padded >> -Wno-weak-vtables -Wno-exit-time-destructors -Wno-global-constructors >> -Wno-switch-enum -Wno-missing-prototypes -Wno-missing-noreturn >> -Wno-unused-parameter -Wno-c++98-compat -fno-limit-debug-info -include >> /home/thierry/ledger/system.hh -o CMakeFiles/libledger.dir/stats.cc.o -c >> /home/thierry/ledger/src/stats.cc >> error: C++0x was disabled in PCH file but is currently enabled >> 1 error generated. >> make[2]: *** [src/CMakeFiles/libledger.dir/stats.cc.o] Erreur 1 >> make[2]: quittant le répertoire « /home/thierry/ledger » >> make[1]: *** [src/CMakeFiles/libledger.dir/all] Erreur 2 >> make[1]: quittant le répertoire « /home/thierry/ledger » >> make: *** [all] Erreur 2 >> acprep: ERROR: Execution failed: make VERBOSE=1 >> >> ----------8<--------------------8<--------------------8<---------- >> >> >> On Saturday, May 3, 2014 1:57:18 PM UTC+2, Hans Erik van Elburg wrote: >>> >>> Hi Thierry, >>> >>> That does not work for me unfortunately. make gives the same error as acprep >>> update does >>> >>> /Hans Erik >>> >>> Op zaterdag 3 mei 2014 00:40:23 UTC+2 schreef thierry: >>>> >>>> On vanilla Ubuntu 14.04, I managed to compile, with some trick: >>>> >>>> a) Install dependencies, the following were the minimum for me: >>>> build-essential cmake doxygen libboost-system1.55-dev >>>> libboost1.55-dev python-dev gettext git libboost-date-time1.55-dev >>>> libboost-filesystem1.55-dev libboost-iostreams1.55-dev >>>> libboost-python1.55-dev libboost-regex1.55-dev libboost-test1.55-dev >>>> libedit-dev libgmp3-dev libmpfr-dev texinfo >>>> >>>> b) Clone repository : >>>> git clone git://github.com/ledger/ledger.git >>>> >>>> c) Change directory to ledger, then : >>>> ./acprep update >>>> --> this fails as described in first post from James >>>> >>>> d) Launch compilation via: >>>> cmake . -DUSE_DOXYGEN=1 -DUSE_PYTHON=1 >>>> make >>>> >>>> e) Check if everything looks ok: >>>> make check >>>> >>>> I have tried a+b+d : it fails. >>>> Only a+b and then (d+c or c+d) works. >>>> >>>> I believe there is something missing in acprep script. >>>> >>>> >>>> Thierry >>>> >>>> PS : my first post since months, I had a motorcycle accident, my fault, >>>> 4 fractures to pelvis bone, spent 3 months in hospital, almost no sequel, >>>> lucky me. >>>> >>>> >>>> On Monday, April 21, 2014 2:05:08 PM UTC+2, James Clemence wrote: >>>>> >>>>> On Ubuntu 14.04 x86_64, the build is failing. I've got the following >>>>> dependencies installed: >>>>> >>>>> libboost1.55-dev libboost-regex1.55-dev libboost-date-time1.55-dev >>>>> libboost-filesystem1.55-dev build-essential cmake texinfo python-dev >>>>> zlib1g-dev libbz2-dev libgmp3-dev bjam gettext cvs libmpfr-dev >>>>> >>>>> However, build fails with the following issue: >>>>> >>>>> [ 3%] Building CXX object src/CMakeFiles/libledger.dir/stats.cc.o >>>>> /home/jvc26/ledger/src/stats.cc:32:21: warning: >>>>> /home/jvc26/ledger/system.hh.gch: not used because >>>>> `__GNUC_GNU_INLINE__' not defined [-Winvalid-pch] >>>>> #include <system.hh> >>>>> ^ >>>>> In file included from /home/jvc26/ledger/src/exprbase.h:57:0, >>>>> from /home/jvc26/ledger/src/draft.h:45, >>>>> from /home/jvc26/ledger/src/stats.cc:34: >>>>> /home/jvc26/ledger/src/utils.h:488:12: error: ‘std::unique_ptr’ has >>>>> not been declared >>>>> using std::unique_ptr; >>>>> ^ >>>>> In file included from /home/jvc26/ledger/src/report.h:52:0, >>>>> from /home/jvc26/ledger/src/stats.cc:38: >>>>> /home/jvc26/ledger/src/session.h:62:3: error: ‘unique_ptr’ does not >>>>> name a type >>>>> unique_ptr<journal_t> journal; >>>>> ^ >>>>> /home/jvc26/ledger/src/stats.cc: In function ‘ledger::value_t >>>>> ledger::report_statistics(ledger::call_scope_t&)’: >>>>> /home/jvc26/ledger/src/stats.cc:49:31: error: ‘class >>>>> ledger::session_t’ has no member named ‘journal’ >>>>> statistics(report.session.journal->master->family_details(true)); >>>>> ^ >>>>> make[2]: *** [src/CMakeFiles/libledger.dir/stats.cc.o] Error 1 >>>>> make[1]: *** [src/CMakeFiles/libledger.dir/all] Error 2 >>>>> make: *** [all] Error 2 >>>>> acprep: ERROR: Execution failed: make >>>>> >>>>> Any pointers? Thanks! >>>>> >>>> -- > > --- > You received this message because you are subscribed to the Google Groups > "Ledger" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to ledger-cli+unsubscr...@googlegroups.com. > For more options, visit https://groups.google.com/d/optout. > -- --- You received this message because you are subscribed to the Google Groups "Ledger" group. To unsubscribe from this group and stop receiving emails from it, send an email to ledger-cli+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.