On Thu, Dec 11, 2008 at 12:07 PM, Del Miller <[email protected]> wrote: > Hi All, > > I'm getting desperate here... I set up a new server (Debian) and have > successfully migrated LSMB over to it. It's been a couple of weeks > since I did the initial migration and testing but I did not have any > printing problems at the time. So, I go to print out billing yesterday > and I get nothing. LSMB does not report any errors, neither does CUPS > (even with debugging turned on). I see the job show up in the print > queue and then disappear as if it printed but the printer never budges. > > If I move to the CLI and print from there, all works as expected and > everything prints out just fine as does Firefox and OpenOffice. > > I can print preview/print to the screen using PostScript/Evince... that > works, but I can't get Evince to print. > > I double checked all the settings in ledgersmb.conf and all seems fine, > here's the relevant section: > > [printers] > # Available printers > Default = lpr > Laser = lpr -P NEC > PDF = lpr -P CUPS-PDF-Printer > MICR = lpr -P LaserJet-4L
I believe there are issues with the CUPS tools provided in the .deb. You can get around this by doing something like: LJ4 = lp -d lj4 > /dev/null Or at least I ran into a similar issue on Ubuntu, so I think this might be a good place to start. Best Wishes, Chris Travers ------------------------------------------------------------------------------ SF.Net email is Sponsored by MIX09, March 18-20, 2009 in Las Vegas, Nevada. The future of the web can't happen without you. Join us at MIX09 to help pave the way to the Next Web now. Learn more and register at http://ad.doubleclick.net/clk;208669438;13503038;i?http://2009.visitmix.com/ _______________________________________________ Ledger-smb-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/ledger-smb-users
