I am working with a laser manufacturer about a laser kit. There are major legal problems with selling solely an electronics package. This kit would be all of the parts one of their production machines.
Here are the specs Laser-type : Sealed CO2 laser tube Laser power: 40W (special order for 60W) Machine Enclosure dimensions: 1170Tall x 800Deep x 1100Wide mm Machine Enclosure dimensions: 46Tall x 31.5Deep x 43.5Wide inch Crated weight with accessories: ~750 pounds Engraving area: 23.62 x 15.74 inch (600 x 400 mm) Modified Engraving area: 25.00 x 17.13 inch (635 x 435mm) Motorized Worktable with about 10 inches of usable height Engraving speed: 0-60,000mm/min Max cutting speed: 0-36,000mm/min Laser output control: 1-100% software setting Location precision: less than 0.01mm Highest scanning precision: 50-1000DPI Working voltage: 110VAC or 220VAC+-10%, 50-60Hz Operating temperature: 0-45 degree Operating humidity: 5- 95% non condensing Minimum shaping character: English 1.0 x 1.0mm Graphic format supported: BMP, JPG, GIF, HPGL, NC, PLT, DST, DXF, and AI Driving system: micro divided stepper Cooling mode: water-cooling and protection system Auxiliary equipments : Exhaust-fans, air-exhaust pipe Controlling software : LaserCut 5.3 and DSP control system. Compatible Software : TAJIMA , CorelDraw, AutoCAD, Photoshop Color separation: yes The assembled machine costs $5900 plus freight and we project the kit in the $3000 range. Price also includes unlimited phone support for 6 months, me and a forum like this one. Once you get the kit running then it is possible to design/build a frame for any size you want and move the electronic to it but of course that voids any warranty. Laser frames are much, much lighter than a router because there are no cutting forces. A 4' wide gantry could use single 1x2 steel stock and weigh less than 10 lbs. Please let me know whether you would be interested or not at this price range. Your input either way is very important. Art Ransom [email protected] www.turningaround.org -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/legacy-ornamental-mills?hl=en.
