Hello C.A.G. Looks like a good prototype to me. I need something, too. And what kind of wood are you turning?
Begat On Nov 16, 6:55 pm, CURTIS GEORGE <curtgeo...@wowway.com> wrote: > Hello guys. > > This is my first successful attempt to limit the wood chips from bogging down > my rails on my Legacy. (an old 1000ex) > > Ive found four different ways that did not work. (but why talk about > failures? Even though I did learn from each of them.) ;-) > > Here are a few photos of the screen shield. ( I used vinyl window screening > as my chip shield.) > > This is a very simple jig. > > Even though Im using screen which lets the fine dust through,this idea works > to stop most of the stuff flying into my rails. I am planing to > > use some soft clear plastic sheeting on my next test run. > > But here are the results from this test. (look at the pictures) > > This is to easy. ( I almost cant believe it works as well as it did). I used > a piece of vinyl window screen 8"x3" I made a holder that attached to the > router on my Legacy. > > On this test I cut from the tail stock end towards the head stock. I cut on > the left side of center (clime milling) > > Please let me know what you think. > > There is more to come, on this topic. > > Until then. > > talk to you all latter. > > C.A.G. > > > > P1040389.JPG > 603KViewDownload > > P1040388.JPG > 496KViewDownload > > P1040394.JPG > 434KViewDownload -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. To unsubscribe from this group, send email to legacy-ornamental-mills+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/legacy-ornamental-mills?hl=en.
