Hello Bill It looks like they do, and always did make these bits, Its just That I never seen them before. I own a two bearing reeding bits, the 1/4" radius and the 3/16 radius, perhaps the 3/8 one or larger will work for my plans? In the worst case I can go the route that Mike did? and make my own. I know the look that I want, but all the details are still a little sketchy at this point. ;- ) I wish that I could aford $5000 worth of router bits. (I know what you went through to get those, And I dont want to go there.) ;-) Thanks for your reply Bill. Im always trying to keep an eye open to any new equipment that I can find. (with a budget in mind.) Have a GREAT DAY. C.A.G .
----- Original Message ----- I thought magnate always sold these but i could be wrong I remembr seeing them when I bought $5000 worth of bits after the fire about a year ago. I have not seen anything like what your looking for perhaps you can get one of magnates bits ground to suit your needs Bill From: legacy-ornamental-mills@googlegroups.com [mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of CURTIS GEORGE Sent: Wednesday, 26 March 2014 7:48 AM To: Legacy-Ornamental-Mills Subject: Magnate router bits http://www.magnate.net/ProductDetails.asp?ProductCode=PG1043 Item# Item Name Our Price Qty Add 7691 7691: Cutting Height:1-1/8"; Bead Height:3/8"; Shank Diameter:1/2"; Shank Length:5"; Radius:3/16"; $39.30 1 [ ] 7692 7692: Cutting Height:1-1/4"; Bead Height:1/2"; Shank Diameter:1/2"; Shank Length:5"; Radius:1/4"; $44.66 1 [ ] 7693 7693: Cutting Height:1-1/2"; Radius:3/8"; Bead Height:3/4"; Shank Diameter:1/2"; Shank Length:5"; $50.05 1 [ ] 7696 7696: Cutting Height:1"; Bead Height:1/4"; Shank Diameter:1/2"; Shank Length:5"; Radius:1/8"; $35.97 1 [ ] 7697 7697: Cutting Height:1-3/4"; Radius:1/2"; Bead Height:1"; Shank Diameter:1/2"; Shank Length:5"; $56.61 1 [ ] Check the items you wish to purchase, then click Extended Side Reeding Router Bit, 2 Flute Carbide Tipped" border="0" /> Hello everyone, I just found a few bits on Mangate web side that Ive not seen before. I own a few Reeding bits that Magnate sells, but these bits have bearings, I did not know that thay sold these bits with out bearing. As I can see the only bit 7697 1/2 radius, is the only bit that is not covered by the other set Item# Item Name Our Price Qty Add 7671 7671: Bead Height:3/8"; Shank Diameter:1/2"; Shank Length:5"; Radius:3/16"; $38.81 1 [ ] 7672 7672: Bead Height:1/2"; Shank Diameter:1/2"; Shank Length:5"; Radius:1/4"; $44.29 1 [ ] 7673 7673: Bead Height:3/4"; Shank Diameter:1/2"; Shank Length:5"; Radius:3/8"; $50.22 1 [ ] 7675 7675: Bead Height:5/8"; Shank Diameter:1/2"; Shank Length:5"; Radius:5/16"; $46.81 1 [ ] 7676 7676: Bead Height:1/4"; Shank Diameter:1/2"; Shank Length:5"; Radius:1/8"; $35.48 1 [ ] 7678 7678: Bead Height:3/16"; Shank Diameter:1/2"; Shank Length:5"; Radius:3/32"; $33.23 1 [ ] Check the items you wish to purchase, then click Side Reeding Carbide Tipped Router Bit, 2 Flute" border="0" /> Ive been looking for a reeding bit what a good sized radius but one with a small bead hight, (I dont want a deap cut, but one with a well defined radius, To me it looks like the 3/8 radius is the best choice for my project. The purpose of this message is two-fold, One to let you all know what I found, and did not know that Magnate sells, and the Other is to ask you all if you know any other router bit company that sells a bit like what Im looking for. Thanks a lot. I hope everyone has a good day. Now,Go out there and making saw dust. ;-) C.A.G. No virus found in this message. Checked by AVG - www.avg.com Version: 2014.0.4354 / Virus Database: 3722/7243 - Release Date: 03/25/14 No virus found in this message. Checked by AVG - www.avg.com Version: 2014.0.4354 / Virus Database: 3722/7243 - Release Date: 03/25/14 -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com . To post to this group, send email to legacy-ornamental-mills@googlegroups.com . Visit this group at http://groups.google.com/group/legacy-ornamental-mills . For more options, visit https://groups.google.com/d/optout . -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com . To post to this group, send email to legacy-ornamental-mills@googlegroups.com . Visit this group at http://groups.google.com/group/legacy-ornamental-mills . For more options, visit https://groups.google.com/d/optout . -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at http://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout.
