Hi Dave A simple way to get it centred if you have access to a wood lathe or metal for that matter is to turn a disk the size of the Legacy router mounting plate cut out and on that same piece of material and on the same centre line turn another disk to match the inner diameter of your DeWalt black plastic base, I assume it is a DW 625, and then put one disk into the Legacy router mounting plate cut out and the other end in the DeWalt plate. Every thing is now centred and all you have to do is drill the three holes, WARNING make sure DeWalt fits in the router mounting plate with out fowling any other parts. This solution is known to work and I still have the template blank in my workshop as DeWalt 625 and Trend T-9 are very popular in Europe. This was not my idea but of one of my customers who is now a good friend as he bought enough product from me, well that’s what he reckons. Regards Euro Roger From: Bill Bulkeley Sent: Wednesday, February 18, 2015 11:07 PM To: legacy-ornamental-mills@googlegroups.com Subject: RE: how to mount dewalt 3hp plunge router on legacy 600exl
I don’t have a dewalt plunge router but I do have a triton plunge router When mounting my routers I use the thin plastic bottom plate of the router (its usually is only held on by a couple of small screws), as a template to mark any holes I have to drill in the mill .that way too I can measure all round to get it centre in the legacy cross slide hole Bill From: legacy-ornamental-mills@googlegroups.com [mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Dave Chrusciel Sent: Tuesday, 17 February 2015 6:57 PM To: legacy-ornamental-mills@googlegroups.com Subject: how to mount dewalt 3hp plunge router on legacy 600exl i have a legacy 600exl and i know it is designed to use the pc router. i have a new 3hp dewalt with 3 mounting holes. i will probably have to drill some holes to mount the dewalt router, any suggestions on how to mount it so it is centered. does anyone have a legacy ornamental mill with a dewalt plunge router. -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at http://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at http://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at http://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout.
