In Greendale WI, a large area may be an acre or 2. I think in my sub division that I have the biggest yard at 1/3 acre.
In the City of Milwaukee, a normal yard 120 yards by 80 yards (don't quote me on this). Harvey On Wed, Mar 30, 2016 at 8:24 PM, MWF <mwfos...@earthlink.net> wrote: > Roger, > > Just curious - in England/Great Britain, what is the definition of "a > large plot of land"? > For a home in the suburbs of a large city in the USA, a "large piece of > land" might be 2 to 5 acres. > In an area outside of a smaller city (or a bit further out around a large > city, it might be defined as 5 to 12 acres? > And moving a bit further away from the city in the above two examples, > that Large piece might be 12 to 25 acres. > > The above "definitions" are merely my own - not something I have ever seen > published. I live about 25 minutes outside of Washington, DC. So my > perspective may be skewed some by where I live. In any case, if any of > ya'll in the USA have any input regarding a "large piece of land" where you > live, please give us your thoughts. > > It should be interesting to see how this definition plays out in different > parts of both the USA as well as the world. Aussieman, we look forward to > hearing from you. And if there is anyone living in Japan, Korea, Germany, > Ukraine, or Siberia, your input will be appreciated as well. > > Thanks. > Mac > ------------------------------ > ------------------------------ > > -----Original Message----- > From: Roger Phebey > Sent: Mar 30, 2016 5:42 PM > To: legacy-ornamental-mills@googlegroups.com > Subject: RE: Youtube Video of Barley Twist Being Milled on Legacy Revo > > Hi Curt > > When I moved house in May last year to a new property I had no garage or > workshop and a large plot of land that was uncultivated. I purchased a > workshop and have spent the last few months gardening so the idea I could > build my own “Legacy” is not on my agenda or my wife’s. > > > > I will keep on looking for a Model 900 with Rotary Table or a REVO at a > realistic price. In the meantime I will keep watching this group and put my > two cents in from time to time . > > > > Cheers > > Roger > > > > *From:* legacy-ornamental-mills@googlegroups.com [mailto: > legacy-ornamental-mills@googlegroups.com] *On Behalf Of *CURTIS GEORGE > *Sent:* 30 March 2016 03:43 > *To:* legacy-ornamental-mills@googlegroups.com > *Subject:* Re: Youtube Video of Barley Twist Being Milled on Legacy Revo > > > > Hello Roger. > > I don't want to get off track on this massage, but Why don't you make your > own machine, Im sure you could come up with the parts. and at the very > least Im sure Legacy would sell you what you cant dig up your self. Things > like the headstock and gears would be the hardest parts to come up with. > knowing you ,everything else you could make with out much problems. Come on > Roger, get back into the game. No One ever said you had to play using all > the same rules. > > ;-) > > ( think of it like this , You drive on the wrong side of the street, In > England, but you still drive to where you want to go. So why not play by > your own rules, and make your own unit ? Roger's Legacy.) > > C.A.G. > > > ------------------------------ > > *From: *"Roger Phebey" <rhp...@gmail.com> > *To: *legacy-ornamental-mills@googlegroups.com > *Sent: *Tuesday, March 29, 2016 9:05:59 AM > *Subject: *RE: Youtube Video of Barley Twist Being Milled on Legacy Revo > > > > An interesting video and how I wish I had a manual Legacy machine, why did > I sell them all? > > Cheers > > Roger > > > > *From:* legacy-ornamental-mills@googlegroups.com [ > mailto:legacy-ornamental-mills@googlegroups.com > <legacy-ornamental-mills@googlegroups.com>] *On Behalf Of *CURTIS GEORGE > *Sent:* 29 March 2016 13:59 > *To:* legacy-ornamental-mills@googlegroups.com > *Subject:* Re: Youtube Video of Barley Twist Being Milled on Legacy Revo > > > > Impressive! I can see this guy use's his Legacy . (I'm keeping this one > for my files. Thanks Bill.) > > > > C.A.G. > > > ------------------------------ > > *From: *"Bill Bulkeley" <bulke...@mmnet.com.au> > *To: *legacy-ornamental-mills@googlegroups.com > *Sent: *Tuesday, March 29, 2016 2:32:40 AM > *Subject: *RE: Youtube Video of Barley Twist Being Milled on Legacy Revo > > > > Very pretty, that guy does make very nice candle sticks here is his web > page > > http://www.andurildesigns.com/#!candlesticks/c1q9i > > > > Bill > > > > *From:* legacy-ornamental-mills@googlegroups.com [ > mailto:legacy-ornamental-mills@googlegroups.com > <legacy-ornamental-mills@googlegroups.com>] *On Behalf Of *CURTIS GEORGE > *Sent:* Tuesday, 29 March 2016 3:27 PM > *To:* legacy-ornamental-mills@googlegroups.com > *Subject:* Re: Youtube Video of Barley Twist Being Milled on Legacy Revo > > > > That's some Pretty wood! > > C.A.G. > > > ------------------------------ > > *From: *"Bill Bulkeley" <bulke...@mmnet.com.au> > *To: *legacy-ornamental-mills@googlegroups.com > *Sent: *Monday, March 28, 2016 10:21:25 PM > *Subject: *RE: Youtube Video of Barley Twist Being Milled on Legacy Revo > > > > Great find I like it I missed that one I search regularly on YouTube > > https://www.youtube.com/watch?v=lKBM8siXkz8 > > here is another from the same guy > > Bill > > > > *From:* legacy-ornamental-mills@googlegroups.com [ > mailto:legacy-ornamental-mills@googlegroups.com > <legacy-ornamental-mills@googlegroups.com>] *On Behalf Of *Louis Brown > *Sent:* Tuesday, 29 March 2016 3:42 AM > *To:* Legacy Ornamental Mills > *Subject:* Youtube Video of Barley Twist Being Milled on Legacy Revo > > > > FYI > > > > https://www.youtube.com/watch?v=ITQyHkxZqp4&feature=youtu.be > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > To post to this group, send email to > legacy-ornamental-mills@googlegroups.com. > Visit this group at > https://groups.google.com/group/legacy-ornamental-mills. > For more options, visit https://groups.google.com/d/optout. > -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at https://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout.
