Damn spellcheck , that's not what I wrote! LOL On Saturday, May 14, 2016, Cole Andrews <coleandrew...@gmail.com> wrote:
> I think I will try that mounting my on that with the spoiler board more > note to the pilaster dogs. > > On Sunday, May 15, 2016, Okla Mike (Liltwisted) <legacym...@iglide.net > <javascript:_e(%7B%7D,'cvml','legacym...@iglide.net');>> wrote: > >> There is another way to secure the work piece to mill it. I used masking >> tape and Super glue the other day and it was awesome!! >> >> 1. Apply masking tape to the project piece as well as the work (spoiler >> board) attached to the machine. >> >> 2. Set them together in place where you will be working with them for a >> dry fit. >> >> 3. trace around the Project piece when it is in the correct position. >> >> 4. Put a thin layer of super glue on the spoiler board and spray the >> project piece with glue accelerator. >> >> 5. You have 1 second to adjust alignment when the 2 halves meet, then >> hold in place for 5 seconds. >> >> It's that easy. They will not slide because there is a 100% glue contact >> with the masking tape on both surfaces and a positive bond holding the two >> tape pieces together. >> >> When it is time to part the two pieces, a slight lifting with a chisels >> will start the pulling off of one of the masking tape bonds, once it >> starts, it will be easy to complete. You are going to be amazed at just >> how effective this is and wonder where it has been all our lives. >> >> >> Mike >> >> OK >> >> On 5/14/2016 8:35 PM, CURTIS GEORGE wrote: >> >> Hello Cole >> I wish you luck on this job. (YES Please send pictures!) I too think >> that using Dogs should work for you. >> >> Good luck on this project, >> Looking forward, to see what you do. >> C.A.G. >> >> ------------------------------ >> *From: *"cole" <coleandrew...@gmail.com> >> *To: *"Legacy Ornamental Mills" >> <legacy-ornamental-mills@googlegroups.com> >> *Sent: *Saturday, May 14, 2016 9:16:27 PM >> *Subject: *1911 grips >> >> I believe I may have my first paying gig. A customer wants me to make >> grips for guns if I can make a good prototype for him . I am trying to work >> out a template of some sort. the ones he supplied as an example have a >> slight curve looking from the end and are tapered width ways top to >> bottom. Has anybody else try this yet? I was thinking pilaster dogs but >> that taper thing has me wondering. BTW Curt tried out that toy you sent me >> works like a charm . I just got too aggressive with cuts and knocked the >> blank off my glue block I will try again soon pictures to follow. >> >> >> -- >> You received this message because you are subscribed to the Google Groups >> "Legacy Ornamental Mills" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to legacy-ornamental-mills+unsubscr...@googlegroups.com. >> To post to this group, send email to >> legacy-ornamental-mills@googlegroups.com. >> Visit this group at >> https://groups.google.com/group/legacy-ornamental-mills. >> For more options, visit https://groups.google.com/d/optout. >> >> -- >> You received this message because you are subscribed to the Google Groups >> "Legacy Ornamental Mills" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to legacy-ornamental-mills+unsubscr...@googlegroups.com. >> To post to this group, send email to >> legacy-ornamental-mills@googlegroups.com. >> Visit this group at >> https://groups.google.com/group/legacy-ornamental-mills. >> For more options, visit https://groups.google.com/d/optout. >> >> >> -- >> You received this message because you are subscribed to the Google Groups >> "Legacy Ornamental Mills" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to legacy-ornamental-mills+unsubscr...@googlegroups.com. >> To post to this group, send email to >> legacy-ornamental-mills@googlegroups.com. >> Visit this group at >> https://groups.google.com/group/legacy-ornamental-mills. >> For more options, visit https://groups.google.com/d/optout. >> > > > -- > Sent from Gmail Mobile > -- Sent from Gmail Mobile -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at https://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout.
