Thanks Curt Great info and pics Thank you Sent from Denson's iPhone
> On Jun 13, 2020, at 10:17 AM, 'Curt George' via Legacy Ornamental Mills > <legacy-ornamental-mills@googlegroups.com> wrote: > > > Hello Again. This topic should stand on its own. > > I feel a motor drive is a must for any Legacy owner. > I originally did not by a motor drive for my machine, I felt it was to > expensive and I did not need it. I was WONG on both accounts. Granted I DID > not by form Legacy, I did make my own, the Motor makes the Legacy into a much > better machine. > Here are some pix. of my motor. > As you can see I did not mount my motor as Legacy did, (on the end of the > acme screw.) The main reason was this motor was almost free, and its size is > to big to fit on my Legacy, So I modified it . Its a 90 volt DC gear motor. > 82-1 gear ratio. max. speed is something like 40 rpm. (which is was faster > than I will ever use on my machine.) The gear's and chain are from an Audi > timing chain (I picked up second hand form my auto garage shop.) I made one > limit switch. (not shown) All the wire is Home Depot speaker wire. > > As you can see, there are more than one way to do almost anything. and you > don't have to spend a lot of money to get the job done. > > Talk to you more latter. > C.A.G. > > On Saturday, June 13, 2020, 10:48:34 AM EDT, Curt George > <curt.geo...@yahoo.com> wrote: > > > Hello Everyone > Denson, I have taken your posting and thought it should stand in its own as a > new topic. > > > From: > > 'Denson Ingram' via Legacy Ornamental Mills > <legacy-ornamental-mills@googlegroups.com>Unsubscribe > To:legacy-ornamental-mills@googlegroups.com > > Fri, Jun 12 at 12:56 PM > > Hi Richard > I’m wanting to put a drive motor on my 1200 so any info or help would be > appreciated. > Thanks > Denson > > > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/103852167.228800.1592061431975%40mail.yahoo.com. > <Legacy drive motor.JPG> > <Legacy drive motor2.JPG> > <Legacy drive motor3.JPG> -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/FFF1EB0E-D169-4C4B-8669-64A510EF8C04%40yahoo.com.
