Install a override inching button that’s what legacy has, push that till the saddle moves off the limit switch then when you let the inching button up the feed will keep going on its own till you stop it or it hits the other limit switch.
Bill -----Original Message----- From: 'Denson Ingram' via Legacy Ornamental Mills <legacy-ornamental-mills@googlegroups.com> Sent: Tuesday, 20 October 2020 12:54 PM To: legacy-ornamental-mills@googlegroups.com Subject: Re: Question to all? Hey guys now I have a question for all. Some might remember I bought a 1200 several months ago and decided to put a drive motor on it. Bought an original Dayton 90vdc (new old stock) off eBay. Bought a 90vdc controller (not Legacy).that all works very well. I decided to put limit switches on to control forward and reverse stops or left and right which ever way you wish to look at it. Got everything to work but have one problem I haven’t been able to solve. When limit switch stops the travel in one direction I want to be able to flip the manual reversing switch to start the travel in the opposite direction. That won’t work. I have to back the router sled off the limit switch for that to happen. Hope I have explained that sufficiently. I’m sure it’s probably in my wiring. Not much of an electrician. If close up pics would help I can post some. Thanks Denson Sent from Denson's iPhone > On Oct 19, 2020, at 12:38 AM, JOHNNY L TYLER <cloudanc...@msn.com> wrote: > > Thank you sir! I would appreciate that help very much. > John > > ________________________________________ > From: legacy-ornamental-mills@googlegroups.com > <legacy-ornamental-mills@googlegroups.com> on behalf of > bulke...@mmnet.com.au <bulke...@mmnet.com.au> > Sent: Sunday, October 18, 2020 9:02 PM > To: legacy-ornamental-mills@googlegroups.com > Subject: RE: Question to all? > > John > > A indexing pointer is not very difficult to make or get made I can > give you dimensions of it if you want to get one made for your mill > > > Bill > > From: 'Curt George' via Legacy Ornamental Mills > <legacy-ornamental-mills@googlegroups.com> > Sent: Monday, 19 October 2020 2:24 PM > To: 'Curt George' via Legacy Ornamental Mills > <legacy-ornamental-mills@googlegroups.com> > Subject: Re: Question to all? > > Sorry Johnny. (I replied JOE.) > At this time I do not think I can help you. ;-( > > C.A.G. > > On Sunday, October 18, 2020, 10:55:35 PM EDT, 'Curt George' via Legacy > Ornamental Mills > <legacy-ornamental-mills@googlegroups.com<mailto:legacy-ornamental-mills@googlegroups.com>> > wrote: > > > Hello Joe. > > the spring loaded indexer is part to the head & tail stock.(Mac. > already bought the expanded indexer set.) If you want that I can hold > onto them for you? At this time I do not what to break the packages > up. Perhaps latter I will be willing to do so? but for now, its the > package or nothing . sorry > > C.A.G. > > On Sunday, October 18, 2020, 09:28:53 PM EDT, JOHNNY L TYLER > <cloudanc...@msn.com<mailto:cloudanc...@msn.com>> wrote: > > > Hi CAG, > your method of pricing your parts is an excellent and fair way. It is common > when pricing power tools--shapers, jointers, planers etc to discount them a > percentage for selling. Since your parts are all new, indexing them to the > most recent prices from Legacy is extremely fair. > I have everything I need for my 1200 except the spring loaded indexing > pointer. If you have a spare one I'd like to buy it. Thanks! > > John > > ________________________________________ > From: 'Curt George' via Legacy Ornamental Mills > <legacy-ornamental-mills@googlegroups.com<mailto:legacy-ornamental-mil > l...@googlegroups.com>> > Sent: Friday, October 16, 2020 9:54 PM > To: > legacy-ornamental-mills@googlegroups.com<mailto:legacy-ornamental-mill > s...@googlegroups.com> > Subject: Re: Question to all? > > Hello everyone. > I am playing it all by ear. If one of our members want the part, then good. > if it doesn't sell, I will either use it my self. or use it for barter. > (which is the way I like things to work, I want this and will trade you X for > that...) It may be OLD SCHOOL, but I have made a lot of trades that all have > worked them self's out very well over the years for me. > > As a matter of fact, I just told a friend, of a story on how I bought > my first band saw, through a series of trades that all started off > with a loaf of fresh French bread. ;-) > > When there is a will there is always a way, to get almost anything done! My > goal here is to help OUR GROUP of Legacy users, get things that they want. > It may sound dumb or ...? but the money is not the reason why I do what I do. > I hope everything sells, but if not I know it will helps someone, > sometime in the future, get what they want. and in the process it will > help me grow as well. "expect the greater reward". ;-) > > Have a good night everyone. > > Hopefully tomorrow I will be done with the pictures, and pricing ? if not it > will be done Sunday. > I will let everyone know more, latter. > Have a good night. > > C.A.G. > > > > On Friday, October 16, 2020, 01:31:45 PM EDT, Harvey Matyas > <hmatyas0...@gmail.com<mailto:hmatyas0...@gmail.com>> wrote: > > > Just another idea. Post the pictures with a price, say 1/2 price of the > original, then let people submit that amount or higher, for a week or month, > some time frame, highest bidder gets the item. > > Just a thought/, > > On Fri, Oct 16, 2020 at 10:33 AM > wm.o....@gmail.com<mailto:wm.o....@gmail.com><mailto:wm.o....@gmail.com<mailto:wm.o....@gmail.com>> > > <wm.o.he...@gmail.com<mailto:wm.o.he...@gmail.com><mailto:wm.o.he...@gmail.com<mailto:wm.o.he...@gmail.com>>> > wrote: > Sounds reasonable to me. > > On Friday, October 16, 2020 at 11:20:26 AM UTC-4 Curt George wrote: > Hello everyone > Another question for "ALL". > > I am cataloging all the photos now. (will be done this weekend) But I > have some problems on the pricing. What do you all think would be fair for > the prices? > I am thinking of using Legacy original prices from there catalog (2005 > catalog not what they sell for or did at todays MARKET prices.) and reducing > them by 1/3 ? So an example a Expanded indexing plate kit, sold for $99.00 > ($100. for easy math) would be $60.00 the .25 gear and x2 gear set sold for > $200.ea. would be $120.00 each... Everything is new and un-used, you will see > in the photos everything is still in its boxes and original packaging. Do > you all think this would be fair? > > I have a lot of things that were only sold a part of the hole machine, things > like PEM incert bracket, Riser adjustment legs (the ones that have the holes > not ladder steps), head & tail stock (bushing)... plus a-lot more that I will > have to just wing the prices. > My goal is to Not take a loss... But to offer OUR GROUP some deals on parts > and things they would not get any other way. figuring out how much to sell > for is a tricky problem. > I would like an honest assessment. What and how much do you people > think would be fair to EVERYONE? (Even me. its hard not to get greedy. > ) ;-) > > C.A.G. > > On Thursday, October 15, 2020, 12:44:17 AM EDT, Curt George > <curt....@yahoo.com<mailto:curt....@yahoo.com>> wrote: > > > Hello Guys. > What the Group dose not want, I will be using for my own projects. > I talked to Mike today, And through our talk I finely decided to part > this machine out. (rather then remake it.) I will be posting photo's of the > parts so all can see what is there. but for now this is what I have found. > > As a small note, 20 yr old packing peanuts, have a shelf life, they > cause a mess when the boxes were open today... ;-) > > This is the list of boxes/ PARTS, > Gear cover, > Dust collection box. (cloth, hardware and vacuum ports.) > 3 sets of Horizontal bench vise's,( I have no idea why anyone would > want of need 3 of them but I found three boxes...) Thin stock support, > (the bar one, not the set that go on the carriage.) Gears. All three > Gear sets (standard, X-2 &.25 gear set.) Vertical bench vise Expand > indexing kit. > Head and tail stock. > carriage assembly, > leg kit. (with screw adjustment and parts.) Rotary table, (or tables, > I have my old one that could also be sold,) I have three at the moment. > Plus a lot of little stuff, like PEM brackets and cap screw (parts to > mount the alum. rail...) Acme Screw part and brackets... Everything to make a > 1000 or 1500. minus the rail and lead screw. > > Most everything is in original boxes, little to no rust on any parts, Only > one box was water damaged, and that box was the manual, paperwork and DVD's. > So nothing of great valve was lost there! > > > I have set aside the Design kit for a prize , If everyone is up for A game? > > And I have set a few thing aside for my self. (but even those may be > up for grabs latter?) > > Have a good night. > talk to you all more tomorrow. > > C.A.G. > > On Wednesday, October 14, 2020, 02:52:43 PM EDT, Harvey Matyas > <hmaty...@gmail.com<mailto:hmaty...@gmail.com>> wrote: > > > Hi Curtis > > Instead of the most posts, how about different project ideas or > modifications to the LOM? (Just an idea or suggestion) > > Harvey > > On Wed, Oct 14, 2020 at 2:28 AM M.W.Foscue > <mwfo...@earthlink.net<mailto:mwfo...@earthlink.net>> wrote: > Hi Curtis, > Sounds Like a good idea to me. > And "Congrats" on scoring that Mill (or parts & accessories for one)! > Mac > ________________________________ > ________________________________ > -----Original Message----- > From: 'Curt George' via Legacy Ornamental Mills > Sent: Oct 13, 2020 11:59 PM > To: Legacy ornamental mills > Subject: Question to all? > > Hello Everyone > > It looks like things have been a little slow around here, So I've come > with an idea. > I just recently came up with a treasure trove of Legacy parts and equipment, > many still in the original box's, not used. > > To make a long story short, the original owner passed away before he was able > to use his machine. Years after his death, the family is cleaning up all of > his... stuff. I just picked up what was marked Legacy, but sadly, I found out > a few boxes that are needed to put this machine together are missing, The 4 > alum. support rails and the lead screw are not part of the package/bundle I > just acquired. > So what do I do? > I just found a Legacy design kit, in one of these boxes, I know a > number of people in our group here have been wanting this design kit. > > So instead of selling the parts to people in the group, How about we > make a game of it? > I was thinking since the holidays are coming up. Who ever has the most > posting to the group could win this prize? > > Since this month is 1/2 over this month dose not count. I want to find out > what everyone thinks of this idea. If We get a number of people liking this > idea. then Next month/ November. we can start keeping count. > > I will also tell everyone now, there are a number of parts that I do > not need. like a rotatory turn table, (I now own three of those !) ;-( > and assembly parts like those pesky PEM fittings that we talked about > earlier this month. plus a hole lot more... (I've not gone through all > of the boxes yet.) > > The Machine was bought in 2002, its a Legacy modal 1000 or 1500? there > is a leg kit. that is open, I do not know if all the parts are there? (yet) > Basically what I am saying, If anyone want any parts for there machine... I > may be able to help them out. > > Bye the way, there is a box marked Dust collection... I defiantly Do > NOT need that! ;-) > > Please let me know what everyone thinks? > > C.A.G. > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send > an email to > legacy-ornamental...@googlegroups.com.<mailto:legacy-ornamental...@goo > glegroups.com.> To view this discussion on the web visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/1852708922.313870.1602647941318%40mail.yahoo.com<https://groups.google.com/d/msgid/legacy-ornamental-mills/1852708922.313870.1602647941318%40mail.yahoo.com?utm_medium=email&utm_source=footer>. > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send > an email to > legacy-ornamental...@googlegroups.com.<mailto:legacy-ornamental...@goo > glegroups.com.> To view this discussion on the web visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/37019364.5.1602660516139%40wamui-charming.atl.sa.earthlink.net<https://groups.google.com/d/msgid/legacy-ornamental-mills/37019364.5.1602660516139%40wamui-charming.atl.sa.earthlink.net?utm_medium=email&utm_source=footer>. > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send > an email to > legacy-ornamental...@googlegroups.com.<mailto:legacy-ornamental...@goo > glegroups.com.> To view this discussion on the web visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/CADbgprWKXVg8xdNkoHhaTR%2BEJFtBDoeNkWk%2BBA5LTq5OqLtnEg%40mail.gmail.com<https://groups.google.com/d/msgid/legacy-ornamental-mills/CADbgprWKXVg8xdNkoHhaTR%2BEJFtBDoeNkWk%2BBA5LTq5OqLtnEg%40mail.gmail.com?utm_medium=email&utm_source=footer>. > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to > legacy-ornamental-mills+unsubscr...@googlegroups.com<mailto:unsubscr...@googlegroups.com><mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com<mailto:unsubscr...@googlegroups.com>>. > To view this discussion on the web visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/75ffb966-d1e5-4f3d-808b-507d7f190eaan%40googlegroups.com<https://groups.google.com/d/msgid/legacy-ornamental-mills/75ffb966-d1e5-4f3d-808b-507d7f190eaan%40googlegroups.com?utm_medium=email&utm_source=footer>. > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to > legacy-ornamental-mills+unsubscr...@googlegroups.com<mailto:unsubscr...@googlegroups.com><mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com<mailto:unsubscr...@googlegroups.com>>. > To view this discussion on the web visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/CADbgprVMfeui2EFsjW-5r6%3DuGp3Dvzm_UnZnLkDCbY_eOdHuTQ%40mail.gmail.com<https://groups.google.com/d/msgid/legacy-ornamental-mills/CADbgprVMfeui2EFsjW-5r6%3DuGp3Dvzm_UnZnLkDCbY_eOdHuTQ%40mail.gmail.com?utm_medium=email&utm_source=footer>. > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to > legacy-ornamental-mills+unsubscr...@googlegroups.com<mailto:unsubscr...@googlegroups.com><mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com<mailto:unsubscr...@googlegroups.com>>. > To view this discussion on the web visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/215605793.321269.1602910443960%40mail.yahoo.com<https://groups.google.com/d/msgid/legacy-ornamental-mills/215605793.321269.1602910443960%40mail.yahoo.com?utm_medium=email&utm_source=footer>. > > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send > an email to > legacy-ornamental-mills+unsubscr...@googlegroups.com.<mailto:unsubscri > b...@googlegroups.com.> > > To view this discussion on the web visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/PH0PR01MB63582B1C05E7FA6732F9CCDFBC1E0%40PH0PR01MB6358.prod.exchangelabs.com. > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to > legacy-ornamental-mills+unsubscr...@googlegroups.com<mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com>. > To view this discussion on the web visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/1502862454.615086.1603076126841%40mail.yahoo.com<https://groups.google.com/d/msgid/legacy-ornamental-mills/1502862454.615086.1603076126841%40mail.yahoo.com?utm_medium=email&utm_source=footer>. > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to > legacy-ornamental-mills+unsubscr...@googlegroups.com<mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com>. > To view this discussion on the web visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/1545607240.620908.1603077829936%40mail.yahoo.com<https://groups.google.com/d/msgid/legacy-ornamental-mills/1545607240.620908.1603077829936%40mail.yahoo.com?utm_medium=email&utm_source=footer>. > > [https://ipmcdn.avast.com/images/icons/icon-envelope-tick-round-orange-animated-no-repeat-v1.gif]<https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient> > Virus-free. > www.avast.com<https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient> > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to > legacy-ornamental-mills+unsubscr...@googlegroups.com<mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com>. > To view this discussion on the web visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/003101d6a5cc%24acd10820%2406731860%24%40mmnet.com.au<https://groups.google.com/d/msgid/legacy-ornamental-mills/003101d6a5cc%24acd10820%2406731860%24%40mmnet.com.au?utm_medium=email&utm_source=footer>. > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/PH0PR01MB635870D7E39117A12A7BABC5BC1E0%40PH0PR01MB6358.prod.exchangelabs.com. -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/EF6E1C22-4387-45A4-BD0E-E6F2FD08987A%40yahoo.com. -- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/000001d6a689%2413baade0%243b3009a0%24%40mmnet.com.au.
