Thanks Mike.
I went out today and bought the brass already. ;-)
Yes I knew better. but I was just hoping that the wax was enough. Live and
Learn. Legacy Stile. ;-p
C.A.G.
On Saturday, December 26, 2020, 11:30:54 PM EST, Okla Mike (Liltwisted)
<legacym...@iglide.net> wrote:
Next time buy a thin brass tubing and use it like making a pen. Still use the
bolt for the clamping but now the brass will keep the glue off the bolt and add
strength to the project. Like
thishttps://www.amazon.com/uxcell-Length-Thickness-Seamless-Straight/dp/B07Z95TXTD
Mike OK
On 12/26/2020 10:08 PM, 'Curt George' via Legacy Ornamental Mills wrote:
Hello everyone.
I came up with a new idea for my bone turning. I used an 1/4" x4" screw as
my center to hold the bone together while drying.
ONE small problem happened. (I know you guys can guess what went wrong.) Even
though I waxed the screw before I set the Epoxy glue. the screw is firmly
stuck inside my bone blank. ;-(
So since I can not remove the screw, I decided to use the screw in as my
mounting for the Legacy.
I cut an alum. square and tapped the center 1/4-20 (so I could screw the bone
onto the alum.) and then I added a Legacy hub to the alum. so I could mount it
onto my Legacy.
I am rather pleased with this jig. so far. I was able to turn the bone and it
open up's some very neat new idea on what I can make on both the Legacy and
Shop Smith.
Now this is not a new idea for me, I already have made jigs to hole 5/16" and
3/8" shafts so I could make wine stoppers and other utensils. on my lathe. but
for some reason, I never thought of making a 1/4" one.
As far as the bone turning goes. I'm not sure if I should rope it or not? But
for the time being, I think I will leave it the way it is.
Here are some photo's of my jig and turning.
Please let me know what you think.
C.A.G.
--
You received this message because you are subscribed to the Google Groups
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an
email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/legacy-ornamental-mills/14611711.2899736.1609042088438%40mail.yahoo.com.
--
You received this message because you are subscribed to the Google Groups
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/legacy-ornamental-mills/a4ee8750-aae5-9079-fee2-3c3a88bb32da%40iglide.net.
--
You received this message because you are subscribed to the Google Groups
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/legacy-ornamental-mills/737568583.379686.1609045288204%40mail.yahoo.com.
