Hey Curtis,
I'd say another finely inovated tool from the Curtis George shop. Nice looking tool. I'm betting it works as good as it looks. I also noted a small sample wrapper of a brain food next to it in one of the pix lol. Again thanks for sharing and keeping those ideas coming. Have a great day. Tim ZWW&S On Sat, Feb 6, 2021, 10:10 PM 'Curt George' via Legacy Ornamental Mills < legacy-ornamental-mills@googlegroups.com> wrote: > Hello Everyone. > > Today I made another barrel trimmer/bone cutter. This one is almost > factory made, everything is off the shelf, with only two small > modifications, that anyone could do. > > I used a Wood Craft/ Whiteside pen reamer 3/4" . $20.00 > And a 22mm diamond hole saw, form Amazon. > https://www.amazon.com/Diamond-Genround-Hollow-Ceramic-Porcelain/dp/B07G5Y4GRT/ref=sr_1_2?dchild=1&keywords=genround+diamond+hole+saw&qid=1612669236&sr=8-2 > $15.00 for the set. (so I guess you could say the hole saw only cost me > $1.00) ;-p > The only modifications that I made were, I had to drill/reamed out the > hole in the shank of the hole saw to 1/4" It was perhaps a 6mm? Let just > say that the hole needed to be made slightly larger to fit the 1/4" drill > bit. ( I did that on the lathe, but a drill press would have done the job > just as well.) > Everything fit together like a glove, The second modification that I did > was with a hack saw. I had to deepen two the diamond hole saw's gullets, so > the brazed carbide would have proper clearance, these groves lock > everything together, If I want more or less carbide to cut, all that I have > to do is put a steel washer (or two) in-between the carbide and the hole > saw's body. > > More latter. > Have a good night everyone. > > C.A.G. > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/511108792.2350472.1612671025245%40mail.yahoo.com > <https://groups.google.com/d/msgid/legacy-ornamental-mills/511108792.2350472.1612671025245%40mail.yahoo.com?utm_medium=email&utm_source=footer> > . > -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLH%2BvKWb1%2Bkqoqvgt3JzCV1C4Voty8HL5io%3DkQ%2BgbMXA8w%40mail.gmail.com.
