Re: Today's barley project re-post

[M.W.Foscue]

Roger,

WOW!!!  You have created some AMAZING works of Craftsmanship down there in the "Tip of the Republic"!!

We will LOVE to hear from you MUCH more often - and hope to see more of your creations!

Thank you very much for responding to my inquiry.

Again - I hope you will participate/post more here.  The talent you exhibit is something we all would love for you to share - here with our Group.

Have a wonderful weekend.

Mac

---

-----Original Message-----
From: Ccm Ccm
Sent: Mar 18, 2021 11:56 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: Today's barley project re-post

Hi Mac, My name is Roger Lieser, I live at the southern tip of texas close to Mcallen

I own a 1200 and 1800 legacy, i've been chopping up wood for many years, attached are a few pictures of 

some of what i do, all of these projects  i used the legacy one way or another

On Wed, Mar 17, 2021 at 8:49 PM M.W.Foscue <mwfos...@earthlink.net> wrote:

Hello,

I've seen posts by you on the Legacy Ornamental Mill (Google) User's Group (manual mill - not their CNC version).

I know I have seen your "From" address of "Ccm Ccm" a number of times over the past few years - but do not recall ever seeing your name.

More than likely you have been commenting on The Group's site longer than I have (which is probably on & off over the past 8-10 years).  Therefore when I signed up, you were probably aalredy aa "ember" so I never saw any info s to your name, where you live, type(s) of Legacy Mill(s) you have etc.

If you don't mind, will you kindly share some of that info. either with me or to The Group?  I asked a long-time member if he knew who Ccm Ccm was - and he didn't know either.

I even looked up "CCM Designs" and "CCM Design" - and found nothing related to woodworking or the Legacy Mill.

I live in Northern Virginia (near Manassas) and have a Model 1000.  Bought it used.

Thank you in advance for your time, consideration of my request, and your reply.

Mac

---

---

-----Original Message-----
From: Ccm Ccm
Sent: Mar 15, 2021 12:55 AM
To: "legacy-ornamental-mills@googlegroups.com"
Subject: Re: Today's barley project re-post

Nice work 

On Sunday, March 14, 2021, Okla Mike (Liltwisted) <legacym...@iglide.net> wrote:

I was going through some old emails and came across this one.  I figured I would bring it back to the front for the groups sake and to start talk about different techniques I used. 

~~~~~~~~~~~~~~~~~~~~~~

Hello everyone.  I decided to take some pictures today as I worked.  Just to give you an idea of the process I use on a daily basis to make a living.  The two most important tools in my shop are the ShopSmith with a duplicator as well as the old WoodChuck AKA Legacy's Grand Pa. 

Here is a picture of the pattern the customer gave me.



And the wood the Customer supplied 4.75 X 22 maple



I glued the pattern with spray glue onto a masonite board



Then did a rough cutout for the Radial Lathe to cut out



I got it mounted and started the saw.  You can see the template and follower on the left under the spring clamp



This is the complete rough out with the saw



I cut the template to the final profile with a scroll saw



Next it was time for the Shopsmith you can see



This is what it looked like turned.  There will be a dowel cut on the right and the left side will be the barley



This is the 2" barley on a 2" one start pitch.  Notice the untouched barrel to the right?  It will be square next.



Here you will see the cut and uncut square section.  I locked the shaft and used the drive dog to keep my 90º rotation true



Then I milled the dowel with a rabbiting bit.



Here are all 4 of them completed



I charged $100 a piece for these.  Just in case you all were wondering.

Mike

--
You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/d260caea-f666-7609-f9dd-a8f27d750b13%40iglide.net.

--
You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/CABP3DRFG%3DnQMdWmsCY66P%3Db5x1xXUVE7gLNxBMOsQRvM8KX34w%40mail.gmail.com.

--
You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/417324193.10099.1616032196946%40wamui-bison.atl.sa.earthlink.net.

--
You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/CABP3DRGgJme7ZZp9kuB%3DLYoLbqmVd-CsKSpDsBgZyQZnf13Tww%40mail.gmail.com.

--
You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/750925208.1555.1616164194349%40wamui-bison.atl.sa.earthlink.net.