Awesome , really inspirational , I think I am gonna "steal " an archway. Thank you.
On Sun, Oct 17, 2021 at 7:48 PM Tim Ziegler <timjzieg...@gmail.com> wrote: > > Very nice work. > Thanks again for sharing. That's what it's all about. > > Kind Regards, > > Timothy J. Ziegler > Ziegler WoodWork & Specialty > 14171 160th Ave. > Foreston MN 56330 > > 320-294-5798 shop > 320-630-2243 cell > > > On Sun, Oct 17, 2021 at 8:54 AM Ccm Ccm <ccmdesi...@gmail.com> wrote: >> >> The fluted part is about 7 ft long and in one piece, the plinth and capital >> blocks are separate pieces. to the top of the arch it's about 11 ft. >> It is all maple. The half columns were turned with a 3 1/2'' spacer block >> between them to get >> a 7 '' diameter circle . >> attached are a few pictures of other parts of the house. the front door is >> walnut 2 1/4'' thick x 7 ' wide x 10 ' tall >> the table is knotty alder the pedestals were made on the legacy i also did >> the woodwork part of the floor >> the corbels on the range hood the curved section i made on the legacy, i cut >> the carved parts out of another corbel >> and joined them >> thanks for your comments >> >> On Sat, Oct 16, 2021 at 7:52 PM Ccm Ccm <ccmdesi...@gmail.com> wrote: >>> >>> Here's a picture of some of my latest legacy work. The fluted half columns >>> were done on the legacy , the plinth blocks and capitals were turned on the >>> lathe, everything was made by me except the carved capital blocks. >>> There were eight various sized openings done like this in the house. >>> >>> Roger >> >> -- >> You received this message because you are subscribed to the Google Groups >> "Legacy Ornamental Mills" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to legacy-ornamental-mills+unsubscr...@googlegroups.com. >> To view this discussion on the web visit >> https://groups.google.com/d/msgid/legacy-ornamental-mills/CABP3DRGnro4WsPBpxbEZG0eYMD1dbakwXpKfVy3YRPSu4vvEww%40mail.gmail.com. > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLFcypi2PhGFohAaYSFhRTWU%3DqP7LEds1bGoyThYCPrJJg%40mail.gmail.com. -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/CAM7C%3D9BHbpK1Svhp56cO9q%2BZB5kpydvM2GNi8se7oNUyiH%2B2zQ%40mail.gmail.com.
