I am really liking that picture with the bone and brass. I think that goes real good together.
Sent from my iPhone > On Nov 20, 2021, at 10:05 PM, 'Curt George' via Legacy Ornamental Mills > <legacy-ornamental-mills@googlegroups.com> wrote: > > > Here are some better photo's of the finished turnings. > > C.A.G. > > On Saturday, November 20, 2021, 10:59:14 PM EST, 'Curt George' via Legacy > Ornamental Mills <legacy-ornamental-mills@googlegroups.com> wrote: > > > Hello Tim > > The diamond pattern is an 8 start rope and then reversed the gears to cut > the other direction. The new roping index system was used on the diamond > pattern. (and again it worked out well.) ;-) > > On the Bone turning. I am getting faster to make these. I made up the glue > ups for the bone in appx. 4hrs. The cutting on the Legacy only takes 30 min. > per depending on the design that I want to use. > > I made a mistake on my first bone turning. (the one with the leather.) After > my glue up was dry, I went to mount it onto my pen mandrel. But glue got into > the brass tubing. So I used a drill bit to remove the glue. I ended up using > to much force and the bone broke in three spots. After scraping the > bone/removing the old glue. I found that the bone would not go together with > out having gaps between the disks. > This is where the leather came in. I soaked the leather in the glue and > added it in-between the bone disks, and compressed the glue up in my vice. > Leather will bend, form and or compress to the shape you want. In this case > it filled the gaps between the bone disks in my turning. > So all I needed to do is, change my plans to work with the leather bone > combo. I used the leather for accent points of transition for the beads and > roping. Over all I'm pretty happy with the way turned out. > Bye the way, I used an 8 start index on this, but felt it was going to be to > tight (due to my choice of router bit I used.), so I only use every other > index points, to make this a 4 start rope. but I did use all 8 indexes for/on > the bead. > On the roped bone spindle. I used a 1/8" radius bit to cut the rope. > https://www.amanatool.com/56125-solid-carbide-point-cutting-roundover-1-8-radius-x-1-4-dia-x-5-16-x-1-4-shank-router-bit.html > > Again using the 8 start index plate. for this spindle. > Everything worked up well for me. > > That's it for now. > talk to you more tomorrow. > Have a good night. > > C.A.G. > > On Saturday, November 20, 2021, 09:36:07 PM EST, Tim Ziegler > <timjzieg...@gmail.com> wrote: > > > Hey, very intriguing Curt. I must say you have to be one of the busiest LOM > guys I know. > Between you and Bill. I'm very impressed. > I must say you have truly become the Bone Turning Master. > I love the diamond pattern you put on the Bill Club. I'm going to have to try > that. > What is your process to do that? > How many hours average per handle on the bone with all the processes you do? > I showed my wife that tonight and she was equally impressed. > > Thanks for sharing and keep up the great work. > > > > > > Kind Regards, > > Timothy J. Ziegler > Ziegler WoodWork & Specialty > 14171 160th Ave. > Foreston MN 56330 > > 320-294-5798 shop > 320-630-2243 cell > > > Virus-free. www.avg.com > > On Sat, Nov 20, 2021 at 4:33 PM 'Curt George' via Legacy Ornamental Mills > <legacy-ornamental-mills@googlegroups.com> wrote: > Hello Everyone! > > Santa's work shop projects for the season are now completed. (Note: I did not > do everything today, but completed everything on my list today.) > I made 22 magnifying glass handles, using some 6 different designs, and a > number of different woods. > I also Made three different Legacy projects shown here, ( Note: I made the > bone handles last week, I'm not sure if I showed them off, So I'm posting > this today.) and a checkering handle on a Billy club. rounds everything off. > LOT's of fun, I learned some new tricks on these projects too, that may help, > your next project if you choose to try them? > > Please let me know what you think. > > Any questions or comments are as always welcome. > > C.A.G. > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/1083380576.229485.1637447598200%40mail.yahoo.com. > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLFbjSyN_fo%3DEcp5H%2BTsDxbCvOJJYAXiY69M%2BwJ3j5V7zQ%40mail.gmail.com. > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/1952104287.551867.1637466731307%40mail.yahoo.com. > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/1966252263.515902.1637467539955%40mail.yahoo.com. > <8start bone rope11RED.jpg> > <Leather bone turning11RED.jpg> -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/D191E4A9-135B-4728-932A-9B1A41656069%40gmail.com.
