Hello Tim
Im not exactly sure why the burning came to be? It could be that the bit was
getting dull? but I think it was more due to me making a very light cut and
moving slower then I normally do. ( un-like wood it the router bit moves slow
the heat/friction of the rotation of the bit will cause this problem.) I made
a adjustment to the depth of cut and that adjustment made one rope slightly
deeper then the others, So I went back and re-cut all 6 ropes at the same cut
depth, This is when the burning started.Luckily for me most of the burning can
be removed with just a little elbow grease. (sanding and then buffing.)
Have a good 4th of July. Enjoy your Family Time! ;-)
talk to you and all more latter.
C.A.G.
On Sunday, July 3, 2022 at 05:55:58 AM EDT, Tim Ziegler
<timjzieg...@gmail.com> wrote:
Very nice Curt.Excited to see where you apply the handle as well. Was your bit
getting full that it caused burning, or just hard to get out of the cut soon
enough?Curious if you did any of the process that I was doing to get a nice
tight glue joint?
Talk more later my Son and I are off to NASCAR today .Happy 4th to all
Kind regards
Tim J ZieglerZiegler WoodWork and Specialty
On Sat, Jul 2, 2022, 8:23 PM 'Curt George' via Legacy Ornamental Mills
<legacy-ornamental-mills@googlegroups.com> wrote:
Hello Everyone.
Ive been working on new/different ways to work with bone.
I used a different process to cut the bone disks out today, I have some more
ideas that I will be covering in my details latter.
Today's project is a 6 start bone handle.
There are a few small burn marks that need to be sanded off, but other then
thatI think this handle will do the job I wanted it for.
Have a great Independence day everyone.(4th of July holiday weekend.)
C.A.G.
--
You received this message because you are subscribed to the Google Groups
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/legacy-ornamental-mills/142855812.112113.1656811394925%40mail.yahoo.com.
--
You received this message because you are subscribed to the Google Groups
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLHgA1BDMHYcnvSi8bToVxm0zZme_u2C6bGsXFUc%3DNxg%2BQ%40mail.gmail.com.
--
You received this message because you are subscribed to the Google Groups
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/legacy-ornamental-mills/319904518.828201.1656857917832%40mail.yahoo.com.
