Hey Bill he maybe can. But driving through Minnesota or Wisc. This time of year with doors open is a bit frigid. lol I'm just explain that he did not need all the inside measurements, at this point he has the information he needs. Thanks Kind Regards,
Timothy J. Ziegler Ziegler WoodWork & Specialty 14171 160th Ave. Foreston MN 56330 320-294-5798 shop 320-630-2243 cell On Tue, Dec 27, 2022 at 7:44 PM <bulke...@mmnet.com.au> wrote: > Answer me a question if he has a suburban picup truck why can’t you have > the back gate open and hang the extra length out the back. > > Or even tie to the top of the shut back gate with the other end in the > back up against the back wall ???? > > What don’t I know? > > > > Bill > > > > *From:* legacy-ornamental-mills@googlegroups.com < > legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Tim Ziegler > *Sent:* Wednesday, 28 December 2022 12:16 PM > *To:* legacy-ornamental-mills@googlegroups.com > *Subject:* Re: router crafter > > > > ok but the only thing he was concerned about currently is how long overall > the machines for hauling. > > As he has a suburban. That's why I went out and physically measured my > machines. > > Kind Regards, > > > > Timothy J. Ziegler > > Ziegler WoodWork & Specialty > > 14171 160th Ave. > > Foreston MN 56330 > > > > 320-294-5798 shop > > 320-630-2243 cell > > > > > > On Tue, Dec 27, 2022 at 5:51 PM 'Curt George' via Legacy Ornamental Mills < > legacy-ornamental-mills@googlegroups.com> wrote: > > Hey Bill. > > He may have been looking at an 1000EXL. ? > > C.A.G. > > > > - model 1000EXS (40" capacity) > - model 1000EX (60" capacity) > - model 1000EXL (80" capacity) > > > > On Tuesday, December 27, 2022 at 06:47:45 PM EST, <bulke...@mmnet.com.au> > wrote: > > > > > > model 1000EX (60" capacity) , model 1200 (72" capacity) > > > > references found here https://ornamentalmills.com/history/index.html > > > > Bill > > > > > > > > > > *From:* legacy-ornamental-mills@googlegroups.com < > legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Mike Newman > *Sent:* Wednesday, 28 December 2022 9:39 AM > *To:* Legacy Ornamental Mills <legacy-ornamental-mills@googlegroups.com> > *Subject:* Re: router crafter > > > > I have passed on the first unit in WI near Minneapolis since it appears to > be a 1000ex. To big to fit in my Suburban and I really don't want to pull > my trailer and tarp a unit this time of year through salt/snow. I am > working on a couple of model 1200's(should fit in my suburban) currently in > a few different states. One loaded but higher price and the other less > loaded and lower price. Waiting to here more details on gears available > for the lower priced one before I decide which road trip to possibly take. > > On Monday, December 26, 2022 at 9:07:03 PM UTC-6 timjz...@gmail.com wrote: > > Well Mike you will never go back to anything else getting your hands on a > good Legacy. > > Any more on the one over in Wisconsin? > > > Kind Regards, > > > > Timothy J. Ziegler > > Ziegler WoodWork & Specialty > > 14171 160th Ave. > > Foreston MN 56330 > > > > 320-294-5798 shop > > 320-630-2243 cell > > > > On Mon, Dec 26, 2022 at 5:16 PM Mike Newman <mrnew...@outlook.com> wrote: > > They definately are interesting. I have a never used one still with > original packaging/box in my workshop. I was going to extend distance > between centers to use it, but the limitations in working distance are > because of the wire drum that is used to move the sled. without a major > re-construct you are limited to about 28in of working length which is a > problem for my primary intended use. That is what has me considering a > legacy mill. > > On Monday, December 26, 2022 at 4:48:03 PM UTC-6 aussiman wrote: > > Yes the legacy sort of makes them all redundant > > > > Bill > > > > *From:* legacy-orna...@googlegroups.com <legacy-orna...@googlegroups.com> *On > Behalf Of *Tim Ziegler > *Sent:* Tuesday, 27 December 2022 8:55 AM > *To:* legacy-orna...@googlegroups.com > *Subject:* Re: router crafter > > > > Great Video Bill, > > > > I actually almost bought one of those one time. > > I think for a cheap piece of equipment it had some serious potential. > > I am supposed to be able to do some spirals on the Vega duplicator but > > have never tried. I have Legacy's why bother right lol. > > > > > > Kind Regards, > > > > Timothy J. Ziegler > > Ziegler WoodWork & Specialty > > 14171 160th Ave. > > Foreston MN 56330 > > > > 320-294-5798 shop > > 320-630-2243 cell > > > > > > On Mon, Dec 26, 2022 at 3:43 PM <bulk...@mmnet.com.au> wrote: > > > https://www.youtube.com/watch?app=desktop&v=iQhJS4MZ5nQ&ab_channel=A1-CustomFabricationSolutions > > > > some interesting ideas here we could use. One interesting thing by > adjusting the stops on the cable they make use > > of backlash to mill wider hollows interesting. > > > > Bill > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/000001d91973%2412edd450%2438c97cf0%24%40mmnet.com.au > <https://groups.google.com/d/msgid/legacy-ornamental-mills/000001d91973%2412edd450%2438c97cf0%24%40mmnet.com.au?utm_medium=email&utm_source=footer> > . > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental...@googlegroups.com. > > To view this discussion on the web visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLEYeJFviUOJkBP51%3DBq7ndpESbPMPc%2BOj9Yu_5dk1bzfA%40mail.gmail.com > <https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLEYeJFviUOJkBP51%3DBq7ndpESbPMPc%2BOj9Yu_5dk1bzfA%40mail.gmail.com?utm_medium=email&utm_source=footer> > . > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental...@googlegroups.com. > > To view this discussion on the web visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/49767776-08a4-4137-a7f3-d050fe56f130n%40googlegroups.com > <https://groups.google.com/d/msgid/legacy-ornamental-mills/49767776-08a4-4137-a7f3-d050fe56f130n%40googlegroups.com?utm_medium=email&utm_source=footer> > . > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/2f95bb26-6197-41dd-ab5a-df7b4204f286n%40googlegroups.com > <https://groups.google.com/d/msgid/legacy-ornamental-mills/2f95bb26-6197-41dd-ab5a-df7b4204f286n%40googlegroups.com?utm_medium=email&utm_source=footer> > . > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/000601d91a4d%2496f0d5b0%24c4d28110%24%40mmnet.com.au > <https://groups.google.com/d/msgid/legacy-ornamental-mills/000601d91a4d%2496f0d5b0%24c4d28110%24%40mmnet.com.au?utm_medium=email&utm_source=footer> > . > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/382944107.2644453.1672185110275%40mail.yahoo.com > <https://groups.google.com/d/msgid/legacy-ornamental-mills/382944107.2644453.1672185110275%40mail.yahoo.com?utm_medium=email&utm_source=footer> > . > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLGq07Ke9CTBybodSoPbFRqVo0z41ECSWJED_1qa7fgpAA%40mail.gmail.com > <https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLGq07Ke9CTBybodSoPbFRqVo0z41ECSWJED_1qa7fgpAA%40mail.gmail.com?utm_medium=email&utm_source=footer> > . > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/002801d91a5d%24dc43c590%2494cb50b0%24%40mmnet.com.au > <https://groups.google.com/d/msgid/legacy-ornamental-mills/002801d91a5d%24dc43c590%2494cb50b0%24%40mmnet.com.au?utm_medium=email&utm_source=footer> > . > -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLGrcimL%3DP6BdRNbVMx9hmveuOeA-cHUrgH%2B2KTEkobyHw%40mail.gmail.com.
