great advice Mac! Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty 14171 160th Ave. Foreston MN 56330
320-294-5798 shop 320-630-2243 cell On Tue, Jun 20, 2023 at 8:24 PM M.W.Foscue <mwfos...@earthlink.net> wrote: > Mike, > > > > Apply a "dot" (small dab?) of "Blue Loctite" threadlocker to the set screw > in the extension. > > That should resolve your issue. If you only use that one bit in the > extension, you may want to try the Red Loctite (semi-permanent locking) on > it. > > > > Best of luck. > > Mac > ------------------------------ > ------------------------------ > > -----Original Message----- > From: <legacy-ornamental-mills@googlegroups.com> > Sent: Jun 20, 2023 9:10 PM > To: Legacy Ornamental Mills <legacy-ornamental-mills@googlegroups.com> > Subject: Router bit extension question > > > I have a question for those of you that have the extreme router bit > extension on their LOM router. How often do you check and re-tighten the > extension into the router? I have had it come loose a couple of times with > no real advance notice. Do you check it every time you use the router or > so much run time between checks? Ruin the walking stick I was working on > but no issues with the router or collett/nut that I can see/feel. > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/5bde9544-0bad-7f3a-393f-e6e6e0df0f12%40earthlink.net > <https://groups.google.com/d/msgid/legacy-ornamental-mills/5bde9544-0bad-7f3a-393f-e6e6e0df0f12%40earthlink.net?utm_medium=email&utm_source=footer> > . > -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLEpXhrg8__X%2Bihb%3DZtDCT%2B0bc83TkGzYH7TYAbfu12OSA%40mail.gmail.com.
