Good work, Curt. DanK
On Sunday, November 12, 2023 at 4:04:56 PM UTC-5 Curt George wrote: > The pix show the story. > #1. Ace hardware store mag. glasses (Note price tag.) > #2 .drilling out wood for the metal incert > #3 . Incert glued into place. > #4 . Legacy drive hub installed. > #5 . part made. (in the rough.) > #6 . cleaning up and filling in the cracks and void. > #7 . glass put on for size adjustment. > #8 . glass removed and sanding and polishing started. > #9 . final product, (except, the cutting off of the waist materials.) > #10 .NOT Shown. (I'm not sure, I'm done yet? I still may add some > details, so photo #10 has not been taken yet.) ;-) > > Have a good day everyone. > > C.A.G. > > On Sunday, November 12, 2023 at 03:49:41 PM EST, Curt George < > curt....@yahoo.com> wrote: > > > Woops! hit the wrong button. ;-p > > I was asked for a more detailed step by step directions on this topic. > So here are a number of photos. > > C.A.G. > > P.S. There are 10 photo's So I will be posting two e-mails to cover the > hole topic. > > On Sunday, November 12, 2023 at 03:45:16 PM EST, 'Curt George' via Legacy > Ornamental Mills <legacy-orna...@googlegroups.com> wrote: > > > Hello > > On Friday, November 10, 2023 at 7:59:58 PM UTC-5 Curt George wrote: > > Hello Everyone. > > I have the day off form work, So I have started making Christmas presents > again. > For those older (long term) members, you should remember that a few years > back I made 64 magnifying glasses. (I don't plan to make that many this > year, but I do plan to make a few, Here is the first one of the season.) > > These glasses are cheap to buy, under $3.00 at the local hardware store. > they have plastic handles. > I remove to handle and then use the metal shank (?)(for no better words? > The metal part that hold the glass to the handle.) I put it in a wood block > and then used that part in my tail rest to center the part/handle, then I > turn it on the my lathe and then finish it off on my Legacy. > > "Well" here is what I made today. > any question or comments are, as always Welcome. > > C.A.G. > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/a4b4d5e6-b5e9-4d21-a025-51ed6b0bd301n%40googlegroups.com > > <https://groups.google.com/d/msgid/legacy-ornamental-mills/a4b4d5e6-b5e9-4d21-a025-51ed6b0bd301n%40googlegroups.com?utm_medium=email&utm_source=footer> > . > -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/3bae76ed-4d3e-47bd-9b5b-5bdafab64469n%40googlegroups.com.
