The best way to check is to take the plate off the bottom of your router and try it on the revo and see you can even use the router screws to help line up the holes.
Also be sure you plunge your router to full depth and place it on the revo to make sure the handles on the router clear everything sometimes it can be a tight fit this is explained in the revo assembly video if you have it. you don’t want to drill any unnecessary holes in your mills plate Bill From: [email protected] <[email protected]> On Behalf Of Tim Maxwell Sent: Wednesday, August 14, 2024 6:34 AM To: Legacy Ornamental Mills <[email protected]> Subject: Revo router mounting Before I start drilling new holes or enlarging existing holes, is the carrier plate on the Revo supposed to be predrilled for Bosch routers? The Revo training videos show what I think is a Bosch 1617 EVS mounted, but I can not even get two of the dozen holes in my plate to line up at the same time. The holes all appear to have power coat so I think they are factory instead of previous owner. Tim M -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected] <mailto:[email protected]> . To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/2e7b1342-1251-45fe-8f7a-7ac651f140b2n%40googlegroups.com <https://groups.google.com/d/msgid/legacy-ornamental-mills/2e7b1342-1251-45fe-8f7a-7ac651f140b2n%40googlegroups.com?utm_medium=email&utm_source=footer> . -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/002001daedcc%24c3480800%2449d81800%24%40mmnet.com.au.
