I will give this a try tonight or tomorrow. Thanks for your help! Carol
> -----Original Message----- > From: [EMAIL PROTECTED] [mailto:LegacyUserGroup- > [EMAIL PROTECTED] On Behalf Of ronald ferguson > Sent: Sunday, September 10, 2006 3:36 PM > To: [email protected] > Subject: RE: [LegacyUG] pictures are fine on program, but do not appear on Legacy created > web pages? > > OK, Carol. That size difference could well be significant. Ideally a picture > size of around 300x400 pixels (widthxHeight). For a jpg this gives a size of > about 8KB. Legacy then shrinks this to make the thumbnail which appears on > your web page and the larger size is shown when you click the thumbnail. It > is quite likely that Legacy cannot handle the smaller size correctly. > > What I would like you to do is to take the a-greenberry-1770-1831-9.jpg and > enlarge this to around 300x400 pixels (or 400x300) if Landscape. The danger > here, of course, is that the definition may become rubbish and I don't think > anything can easily be done about that. You may, of course, already have a > larger picture which you can use - if it's bigger it doesn't matter as > Legacy can shrink it. > > When you have done this (or found a larger picture) copy it to the picture > folder with the same file name - thus overwriting the one already there. > Then double click file f108.htm#25 to see if the picture presents OK. If so > upload it to the picture folder on your website overwriting the one that is > there at present and see if it displays correctly (including expansion on > clicking) > > Ron Ferguson > > > > _____________________________________________________________________ > Legacy User Group guidelines can be found at: http://www.LegacyFamilyTree.com/Etiquette.asp To find past messages, please go to our searchable archives at: http://www.mail-archive.com/[email protected]/ For online technical support, please visit http://www.LegacyFamilyTree.com/Help.asp To unsubscribe please visit: http://www.LegacyFamilyTree.com/LegacyLists.asp
