----- Original Message -----
From: "Phil Hawkins" <[EMAIL PROTECTED]>
<snip>
I had a similar issue for some time, except my 'child status' list stayed
blank - I couldn't add to it although I could see it in Access
In the end I created a brand new family file and exported the old file to
it. That worked and my 'child status' list is fully operational.
There must be something that corrupts the list in some way
HTH
Phil
My tblCS child status looked fine in Access also. Tried save file as temp,
no help but exported complete file to Legacy temp.fdb and temp works OK.
Original file is 41.5MB. Temp file is 52.6MB?? After check/repair it dropped
to 41.1MB. I guess all my special Access querys are out.
Check/repair didn't help on the original file.
Thanks very much Phil and Ron
=================
Richard Van Wasshnova
Seal Beach, CA
Have you unlocked the real power of Legacy? Legacy 6.0 Deluxe has 92 features
not found in the Standard Edition. Learn more about these features at
http://legacyfamilytree.com/DeluxeEdition.asp.
Legacy User Group guidelines can be found at:
http://www.LegacyFamilyTree.com/Etiquette.asp
To find past messages, please go to our searchable archives at:
http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/
For online technical support, please visit
http://www.LegacyFamilyTree.com/Help.asp
To unsubscribe please visit: http://www.LegacyFamilyTree.com/LegacyLists.asp
