I've updated to the latest version - My relationship report acts just the same - 8 pages for 1 relationship and 55 for all.
Thelma L. Martin 28090 CR 44 Nappanee, IN 45650 Phone & fax: 574-862-2930 Cell: 574-596-5412 ----- Original Message ----- From: "Thelma L. Martin" <thelm...@frontier.com> To: <LegacyUserGroup@LegacyUsers.com> Sent: Thursday, August 02, 2012 5:59 AM Subject: Re: [LegacyUG] Relationship Calculator The report I am creating is Relationship Calculator from Tools>Relationship Calculator>Print My version is 7.5.0.191 Thanks for your help - I'll likely need to update. Thelma L. Martin 28090 CR 44 Nappanee, IN 45650 Phone & fax: 574-862-2930 Cell: 574-596-5412 ----- Original Message ----- From: "Ron Ferguson" <ronfergy....@tiscali.co.uk> To: <LegacyUserGroup@LegacyUsers.com> Sent: Thursday, August 02, 2012 3:13 AM Subject: Re: [LegacyUG] Relationship Calculator Thank you, Thelma. Please would you clarify which report you are creating; the Relationship Calculator from Tools>Relationship Calculator>Print, as I thought, or the Relationship Report from Reports>All Reports (Books and others)>Relationships, as Tim suggested. If the former, and you have no RelSet.usr, then the problem is that this settings file is not being created. If you are not using the latest version which is 7.5.0.201 then updating may resolve the problem, otherwise I would re-install. If the latter then deleting the RelChart.usr, or as Tim suggested - sticking it in another folder, or renaming to XRelChart.usr - may be the cure. If that works you can delete the old RelChart.usr file. Ron Ferguson http://www.fergys.co.uk/ -----Original Message----- From: Thelma L. Martin Sent: Thursday, August 02, 2012 2:43 AM To: LegacyUserGroup@LegacyUsers.com Subject: Re: [LegacyUG] Relationship Calculator I did not find RelSet.usr but did find a file RelChart.usr Version 5.0.02 Relationship Report 104.059 4.826 3.175 3.175 3.175 1 Arial Arial Arial Times New Roman Times New Roman Arial Arial Arial Produced by Legacy Relationship Chart 16777215 20.813 0 10.406 0 1 1 1 0 1 0 1 0 1 1 0 0 1 1 0 1 18 1 12 1 10 0 10 0 10 0 8 0 6 0 6 0 0 100 110 2 0 0 0 0 Native 0 Thelma L. Martin 28090 CR 44 Nappanee, IN 45650 Phone & fax: 574-862-2930 Cell: 574-596-5412 ----- Original Message ----- From: "Ron Ferguson" <ronfergy....@tiscali.co.uk> To: <LegacyUserGroup@LegacyUsers.com> Sent: Wednesday, August 01, 2012 8:42 PM Subject: Re: [LegacyUG] Relationship Calculator Thank you Thelma. At the moment I cannot see the cause of the problem. Would you mind opening RelSet.usr in your text editor - Notepad will do fine - and copy/paste the contents into another post please - as it's a text file this will be OK. Assuming that you used the Legacy installation defaults you will find the file in the C\Legacy folder. As it is getting on for 2:00am here I am off to bed, so if anybody else wishes to help solve the problem whilst I get some shut-eye please feel free. Ron Ferguson http://www.fergys.co.uk/ -----Original Message----- From: Thelma L. Martin Sent: Thursday, August 02, 2012 12:08 AM To: LegacyUserGroup@LegacyUsers.com Subject: Re: [LegacyUG] Relationship Calculator I have version 7.5 I have done the file maintenance but it made no difference. After running the RelationshipCalculator I chose PRINT then PREVIEW. Settings were "Birth and Death Years" "Marriage Date" "Put Boxes Around Individuals" The first one of the common ancestors shows 6 generations on one side and 5 on the other. If I choose "Print the current relationship" (without "Each on New Page") it shows 8 pages with a generation on each page and both lines of the relationship bunched together on the left side outside the box line. In this relationship report it shows 5 different ways of relationships. The furtherest distant cousin has 8 generations. If I choose "Print all the relationships" with "Each on New Page" it shows 55 pages. Thelma L. Martin 28090 CR 44 Nappanee, IN 45650 Phone & fax: 574-862-2930 Cell: 574-596-5412 ----- Original Message ----- From: "Ron Ferguson" <ronfergy....@tiscali.co.uk> To: <LegacyUserGroup@LegacyUsers.com> Sent: Wednesday, August 01, 2012 3:28 PM Subject: Re: [LegacyUG] Relationship Calculator Thelma, I have tested using various settings and mine works perfectly. However, as you did not state what your settings are I am unable to test your set-up. Also what version of Legacy are you using? You might like to try File>File Maintenance>Check/Repair, but I'm not optimistic. I can see no obvious way of re-setting to the defaults. In the Legacy folder you could try deleting the RelSet.usr file, but again I am not optimistic. Ron Ferguson http://www.fergys.co.uk/ -----Original Message----- From: Thelma L. Martin Sent: Wednesday, August 01, 2012 7:08 PM To: LegacyUserGroup@LegacyUsers.com Subject: Re: [LegacyUG] Relationship Calculator I expermented by using just one relationship with "each on a new page" not checked, with all relationships and "each on a new page" checked and it comes out the same every time. What puzzles me is that several weeks ago I did another relationship and it printed fine. I have over 338,000 people with many relationships so it takes 20-30 minutes to calculate. Thelma L. Martin 28090 CR 44 Nappanee, IN 45650 Phone & fax: 574-862-2930 Cell: 574-596-5412 ----- Original Message ----- From: "Ron Ferguson" <ronfergy....@tiscali.co.uk> To: <LegacyUserGroup@LegacyUsers.com> Sent: Wednesday, August 01, 2012 12:20 PM Subject: Re: [LegacyUG] Relationship Calculator Thelma, Have you looked to see if the check box "each on a new page" is checked. If it isn't and you still have the problem, then we will need to know all your settings if we are to try and reproduce. Mine is OK, which doesn't help much, other than to say that the problem is local to your machine/settings. Ron Ferguson http://www.fergys.co.uk/ -----Original Message----- From: Thelma L. Martin Sent: Wednesday, August 01, 2012 12:08 AM To: LegacyUserGroup@LegacyUsers.com Subject: [LegacyUG] Relationship Calculator After getting results of a calculation I had been able at first to get a nice one page report. Today when I select PRINT, then PREVIEW it shows 8 pages for a 6-generation report and each page has only one generation with both people's names bunched together on the far right side of the page, outside of the box. Any suggestions? Thelma L. Martin Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages after Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyusers.com/ Archived messages from old mail server - before Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp Follow Legacy on Facebook (http://www.facebook.com/LegacyFamilyTree) and on our blog (http://news.LegacyFamilyTree.com). To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp ----- No virus found in this message. Checked by AVG - www.avg.com Version: 2012.0.2197 / Virus Database: 2437/5170 - Release Date: 08/01/12 Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages after Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyusers.com/ Archived messages from old mail server - before Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp Follow Legacy on Facebook (http://www.facebook.com/LegacyFamilyTree) and on our blog (http://news.LegacyFamilyTree.com). To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp ----- No virus found in this message. Checked by AVG - www.avg.com Version: 2012.0.2197 / Virus Database: 2437/5172 - Release Date: 08/02/12 Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages after Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyusers.com/ Archived messages from old mail server - before Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp Follow Legacy on Facebook (http://www.facebook.com/LegacyFamilyTree) and on our blog (http://news.LegacyFamilyTree.com). To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp
