I have two related items to sell, preferably to the same person.  They are:

- StyleWriter II printer.  I tested it and it works.  The installed ink 
cartridge has been little used, but is a couple years old -- I was 
surprised it seems to work fine after sitting in the corner for so long, 
actually.  Uses old round serial cable connection (or the adapter below 
for ethernet).  Asking $12 plus shipping for printer and cartridge.

- StyleWriter EtherTalk Adapter.  Technical specs: 
http://docs.info.apple.com/article.html?artnum=19333&coll=ap -- has 
10BaseT and 10Base2 connections on one side, a serial connection to for 
the cable to a StyleWriter on the other.  Again I have successfully 
tested this, using it to print to the StyleWriter above from either an 
OS9.2 boot or the Classic environment on my old Sawtooth (using the OS9 
StyleWriter 1500 version 2.2 driver).  Looking for $20 plus shipping.

Quirks to be aware of:

- Good luck getting anything OSX to work with these two.  In theory it's 
possible, using the lpstyl driver (possibly compiled with AppleTalk to 
allow the EtherTalk Adapter to be used).  I've reached my personal limit 
of trying to fiddle around and make it work though, and frankly I have a 
lot more printers than I can use and most of them are accessible to most 
of the machines in my network environment, so it's time to pass the 
torch to someone more determined to experiment until it works or someone 
who can use these as-is.

- Last time I tried, the EtherTalk Adapter didn't like plugging directly 
into a 10/100 autosensing network switch.  I have another piece of 
hardware of similar vintage (a Dayna EtherPrint that puts my trusty 
LaserWriter on the network) that has the same quirk.  So I had both 
attached to a 4-port old 10BaseT hub, which in turn was uplinked to the 
main 10/100 network.  Then they work fine.  So you need either to have 
an old 10BaseT environment, or have an old 10BaseT hub that you can 
attach to your more modern environment.  There may be some other ways to 
solve this issue, but this is the workaround I found.

- I should note, I have not tested the 10Base2 connection.  Don't have 
the hardware to do it.

- Power cable (for SWII) and A/C adapter (for SWETA) included, but not 
other cables (serial/ethernet).

Shipping: I will ship either UPS Ground (daily pickup rates) or USPS 
Priority Mail, whichever is less expensive.

Payment: Via PayPal, please.

John Nephew
Saint Paul, MN  55104

-- 
You received this message because you are a member of the LEM Swap group.
To post to this group, send email to [email protected]
To unsubscribe, send an email *from your subscribed address* to 
[email protected]
LEM-Swap is not a discussion list; it is for buying & selling Mac stuff. Reply 
directly to the person who posted, never to the list.
Software piracy is illegal and not allowed on LEM Swap. Except for freeware and 
software originally provided with computers, no software is to be left on hard 
drives unless the original installer (not a burned copy) is included, along 
with any required registration number, password, etc.
Shipments valued at US$100 or more should be insured, and shipments valued at 
US$25 or more should be shipped so they can be tracked.
See the list FAQ http://lowendmac.com/lists/swap.html for guidelines on 
postings, feedback, and dispute resolution. Seller feedback at 
http://groups.google.com/group/swap-feedback

Reply via email to