2014-03-08 22:32 GMT+08:00 William Harrington <kb0...@berzerkula.org>:
>
> On Mar 8, 2014, at 5:34 AM, xinglp wrote:
>
>> Yes, I'm doing this now. It will finish in about 4 hours on machine.
>> And I just finished a build with eudev after util-linux, it boot fine,
>> but enpXsXX change to eth0 again.
>
> That should happen when you enable the rule generator and have /etc/
> udev/rules.d/80-net-name-slot.rules if I'm not mistaken.
/etc/udev/rules.d/70-persistent-net.rules was created on the first
boot by default. with below content.
=====================begin============================
# This file was automatically generated by the /lib/udev/write_net_rules
# program, run by the persistent-net-generator.rules rules file.
#
# You can modify it, as long as you keep each rule on a single
# line, and change only the value of the NAME= key.
# PCI device 0x8086:0x10f5 (e1000e)
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*",
ATTR{address}=="xxxxxxxxxxxxxx", ATTR{dev_id}=="0x0", ATTR{type}=="1",
KERNEL=="eth*", NAME="eth0"
=====================end============================
>
> Sincerely,
>
> William Harrington
> --
> http://linuxfromscratch.org/mailman/listinfo/lfs-dev
> FAQ: http://www.linuxfromscratch.org/faq/
> Unsubscribe: See the above information page
--
http://linuxfromscratch.org/mailman/listinfo/lfs-dev
FAQ: http://www.linuxfromscratch.org/faq/
Unsubscribe: See the above information page
