Hi! I am using this cable with 2 megabit/sec. It is working out of the box in 0.18. I am using it normally as a Serial port (RxD, TxD lines only).
Alex VDR User írta: > Hi. I'm trying to get a TTL232R 5v cable working with lirc and so far > have been unable to do this and am trying to figure out if the problem > is in libftdi or lirc. Is this cable known to be working in libftdi? > I've connected a TSOP1738 IR receiver to the TTL232R cable. Using > lirc's irrecord, my remote control is not correctly detected and the > "raw mode" conf it creates does not work with 99%+ of the keypresses I > try. Since the box this is on is an Nvidia ION-based htpc (32bit), I > can't use a serial IR (which works fine with the same remote control). > > My lirc source is cvs from today and the only libftdi available to me > is from debian linux testing: > > ii libftdi-dev 0.18-1 > Development files for libftdi > ii libftdi1 0.18-1 > Library to control and program the FTDI USB controller > > I downloaded the git source of libftdi thinking there may be some > fixes since 0.18-1 in it but was unable to figure out how to compile > it in debian linux. (I'm not a coder btw). If anyone can help me at > least determine if the problem is libftdi or lirc I would greatly > appreciate it since that would give me a place to start. The device > is detected as follows: > > [ 1.371890] usb 3-2: New USB device found, idVendor=0403, idProduct=6001 > [ 1.371898] usb 3-2: New USB device strings: Mfr=1, Product=2, > SerialNumber=3 > [ 1.371904] usb 3-2: Product: TTL232R > [ 1.371909] usb 3-2: Manufacturer: FTDI > [ 1.371914] usb 3-2: SerialNumber: FTF0GFZ7 > > I'm not sure what other infos may be useful. Thanks for any/all help! > > Best regards, > Derek > > -- > libftdi - see http://www.intra2net.com/en/developer/libftdi for details. > To unsubscribe send a mail to [email protected] > > -- libftdi - see http://www.intra2net.com/en/developer/libftdi for details. To unsubscribe send a mail to [email protected]
