On Fri, Sep 24, 2010 at 8:20 PM, Xiaofan Chen <[email protected]> wrote:
> Dump of the TI/Luminary EK-LM3S1968 board FT2232D 93C46 EEPROM. > > Read EEPROM Device 0 > Word > 0000: 1108 0304 D9BC 0005 80FA 1800 0002 9608 > 0008: 9E36 D412 4600 0803 4C00 4D00 4900 3603 > 0010: 5300 7400 6500 6C00 6C00 6100 7200 6900 > 0018: 7300 2000 4500 7600 6100 6C00 7500 6100 > 0020: 7400 6900 6F00 6E00 2000 4200 6F00 6100 > 0028: 7200 6400 1203 3000 3700 3000 3200 3000 > 0030: 3000 4100 3100 0203 0000 A100 0207 0000 > 0038: 0000 0000 0000 0000 0000 0000 0000 DBD6 > > 4C00 4D00 4900 is "LMI" > 3603 is probably the spacer after "LMI" > > 5300 7400 6500 6C00 6C00 6100 7200 6900 > 7300 2000 4500 7600 6100 6C00 7500 6100 > 7400 6900 6F00 6E00 2000 4200 6F00 6100 > 7200 6400 is "Stellaris Evaluation Board". > 1203 is probably the spacer after it. > > 3000 3700 3000 3200 3000 3000 4100 3100 > is the serial number "070200A1". > 0203 is probably the spacer after it. > > "LMI" has 3 characters. > "Stellaris Evaluation Board" has 26 characters. > "070200A1" has 8 characters. > > 48-3-26-8=11 words. So the following is probably > the user area. > 0000 A100 0207 0000 > 0000 0000 0000 0000 0000 0000 0000 > The last word is probably the spacer after user > area. > The git branch seems to work fine as well but there is a warning. mc...@ubuntu:~/Desktop/build/libftdi/neweeprom/libftdi-1.0/build/examples$ sudo ./eeprom -v 0x0403 -p 0xbcd9 Chip type 2 ftdi_eeprom_size: 128 0x000: 11 08 03 04 d9 bc 00 05 80 fa 18 00 00 02 96 08 ........ ........ 0x010: 9e 36 d4 12 46 00 08 03 4c 00 4d 00 49 00 36 03 .6..F... L.M.I.6. 0x020: 53 00 74 00 65 00 6c 00 6c 00 61 00 72 00 69 00 S.t.e.l. l.a.r.i. 0x030: 73 00 20 00 45 00 76 00 61 00 6c 00 75 00 61 00 s. .E.v. a.l.u.a. 0x040: 74 00 69 00 6f 00 6e 00 20 00 42 00 6f 00 61 00 t.i.o.n. .B.o.a. 0x050: 72 00 64 00 12 03 30 00 37 00 30 00 32 00 30 00 r.d...0. 7.0.2.0. 0x060: 30 00 41 00 31 00 02 03 00 00 a1 00 02 07 00 00 0.A.1... ........ 0x070: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 db d6 ........ ........ EEPROM byte[0x0a] Bit 4 unexpected set. If this happened with the EEPROM programmed by FTDI tools, please report to [email protected] VID: 0x0403 PID: 0xbcd9 Release: 0x0500 Bus Powered: 500 mA Manufacturer: LMI Product: Stellaris Evaluation Board Serial: 070200A1 Checksum : d6db Attached EEPROM: 93x46 PNP: 1 Channel A has Mode 245 High Current IO Channel B has Mode UART VCP -- Xiaofan -- libftdi - see http://www.intra2net.com/en/developer/libftdi for details. To unsubscribe send a mail to [email protected]
