I didn't run that since I can't seem to find it, not on the site or my system. I used apt-get install libftdi-dev to get the files needed, should I get the libftdi1 or is the serial_test.c located elsewhere?
Maurice Ampt. ________________________________________ Van: Uwe Bonnes [[email protected]] Verzonden: vrijdag 4 november 2011 10:59 Aan: [email protected] Onderwerp: Re: Writing and reading to a FT232R >>>>> "Ampt,Maurice" == Ampt,Maurice M L <[email protected]> writes: ... Ampt,Maurice> Perhaps I'm forgetting just a simple set besides baudrate Ampt,Maurice> and line property, thank you in advance for your response. Did you run examples/serial_test.c. This test worked for me with the FTDI FT232TTL board, at least with sending data. You then change that program step by step to your needs. Bye -- Uwe Bonnes [email protected] Institut fuer Kernphysik Schlossgartenstrasse 9 64289 Darmstadt --------- Tel. 06151 162516 -------- Fax. 06151 164321 ---------- -- libftdi - see http://www.intra2net.com/en/developer/libftdi for details. To unsubscribe send a mail to [email protected] -- libftdi - see http://www.intra2net.com/en/developer/libftdi for details. To unsubscribe send a mail to [email protected]
