...
Robert> This, however, is a problem. The kernel only supports these
Robert> devices as serial ports. If you want JTAG or I2C you will need
Robert> to use libftdi. Furthermore I don't think libftdi and ftdi_sio
Robert> play nicely together, so you will need to do the RS232 with
Robert> libftdi too.
You can use the kernel interface on one device and libftdi on another.
Robert> If you have a custom PID (FTDI will issue you a
Robert> batch if you ask) then the kernel will not try to use ftdi_sio
Robert> for your device so using libftdi should be no problem.
libftdi unload the kernel interface with no problem.
Robert> I'll leave the other questions to the experts as I've not tried
Robert> doing I2C or JTAG
Bye
--
Uwe Bonnes [email protected]
Institut fuer Kernphysik Schlossgartenstrasse 9 64289 Darmstadt
--------- Tel. 06151 162516 -------- Fax. 06151 164321 ----------
--
libftdi - see http://www.intra2net.com/en/developer/libftdi for details.
To unsubscribe send a mail to [email protected]
