Can you share the full config file and any output from the programming
tool? Are you using the stock tool or have you modified it at all?
R.
On 7/22/2013 8:15 AM, Dave Bender wrote:
So I'm trying to set up synchronous bitbang on my FT230X board and am
stuck configuring the CBUS pins. I am using ftdi_eeprom built from the
latest git sources. I use a config file with the following lines:
cbus0="BITBANG_WR"
cbus1="IO_MODE"
cbus2="IO_MODE"
cbus3="IO_MODE"
However, when I read back the EEPROM I get:
CBUS0 Function: CLK12
CBUS1 Function: CLK24
CBUS2 Function: CLK24
CBUS3 Function: CLK24
It seems that config file parsing refers to the enum ftdi_cbus_func
while reading back seems to refer to ftdi_cbush_func...can anyone
advise if this is a bug in ftdi_eeprom or libftdi?
------------------------------------------------------------------------
*libftdi* - see http://www.intra2net.com/en/developer/libftdi for details.
To unsubscribe send a mail to
[email protected]
<mailto:[email protected]>
--
libftdi - see http://www.intra2net.com/en/developer/libftdi for details.
To unsubscribe send a mail to [email protected]
