Hi Tamas, On Tuesday, 18. February 2014 10:50:49 Szabo Tamas wrote: > I have used libftdi 1.0 in the past to communicate with a 230X device > and everything worked fine, but the new partial support for FT230X chips > breaks it. > The device I use looks like this: > vid = 0x0403 > pid = 0x6015 > bcdDevice = 0x1000 > > Up until libftdi 1.1 the ftdi->type was TYPE_BM (set in ftdi_init) which > worked fine. > But now the type is set to TYPE_230X in ftdi_usb_open_dev, leading to an > incorrect baudrate to be returned by ftdi_convert_baudrate when trying > to set the baudrate of the connection with ftdi_set_baudrate. > > The other devices of TYPE_R that I use continue to work fine and are not > affected by this, only the ones with TYPE_230X. > For now, I have downgraded to use the older version, but it would be > great if this could be fixed asap.
yes, please send a patch for this issue and I'll apply it ASAP. I don't have the hardware to fix this myself. Thanks Thomas -- libftdi - see http://www.intra2net.com/en/developer/libftdi for details. To unsubscribe send a mail to [email protected]
