whereas ftdi_sio is loaded when my 6010 products are connected, it is
not loaded when my 6014 product is connected.
ie after inserting 6010:
r$ lsmod
Module Size Used by
ftdi_sio 53026 0
$ sudo rmmod ftdi_sio has no effect
regards
On 23/06/16 13:16, Benjamin Vanheuverzwijn wrote:
Did you unload the ftdi_sio driver?
$ sudo rmmod ftdi_sio
On Thu, Jun 23, 2016 at 4:59 AM, Jonathan Chetwynd
<[email protected] <mailto:[email protected]>> wrote:
I cannot** connect UM232H-B, any comments or advice appreciated:
$ ftdi_eeprom --read-eeprom --device i:0x0403:0x6014
example_UM232H-B.conf
FTDI eeprom generator v0.17
(c) Intra2net AG and the libftdi developers
<[email protected] <mailto:[email protected]>>
Unable to find FTDI device with description: i:0x0403:0x6014
Error code: -4 (usb_open() failed)
thanks
Jonathan
Ubuntu 14.04LTS
dmesg
[ 520.257141] usb 3-3: new high-speed USB device number 3 using
xhci_hcd
[ 520.276926] usb 3-3: New USB device found, idVendor=0403,
idProduct=6014
[ 520.276934] usb 3-3: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
[ 520.276938] usb 3-3: Product: UM232H-B
[ 520.276941] usb 3-3: Manufacturer: FTDI
[ 520.276944] usb 3-3: SerialNumber: FTWFRDWY
[ 520.278490] ftdi_sio 3-3:1.0: FTDI USB Serial Device converter
detected
[ 520.278543] usb 3-3: Detected FT232H
[ 520.278546] usb 3-3: Number of endpoints 2
[ 520.278549] usb 3-3: Endpoint 1 MaxPacketSize 512
[ 520.278552] usb 3-3: Endpoint 2 MaxPacketSize 512
[ 520.278555] usb 3-3: Setting MaxPacketSize 512
[ 520.278718] usb 3-3: FTDI USB Serial Device converter now
attached to ttyUSB0
**I have a number of other devices (not currently connected)
0x0403:0x6010 without any problems, and ftdi_eeprom seems to run fine.
--
libftdi - see http://www.intra2net.com/en/developer/libftdi for
details.
To unsubscribe send a mail to
[email protected]
<mailto:libftdi%[email protected]>
--
Benjamin Vanheuverzwijn
------------------------------------------------------------------------
*libftdi* - see http://www.intra2net.com/en/developer/libftdi for details.
To unsubscribe send a mail to
[email protected]
<mailto:[email protected]>
--
libftdi - see http://www.intra2net.com/en/developer/libftdi for details.
To unsubscribe send a mail to [email protected]
