> On 06 Nov 2015, at 08:51, Vadim Rozenfeld <[email protected]> wrote: > > On Thu, 2015-11-05 at 21:46 +0000, Richard W.M. Jones wrote: >> On Thu, Oct 29, 2015 at 11:05:42AM +1100, Vadim Rozenfeld wrote: >>> On Wed, 2015-10-28 at 14:53 +0300, Roman Kagan wrote: >>>> 1) tell which devices can be configured >>> Not sure that I fully understated your question. but if you are going to >>> create some sort of off-line automatic virtio-win drivers update >>> utility, then it shouldn't be too complicated. Firs of all you will need >>> to obtain the Windows kernel version by reading the following Registry >>> key - "HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion". Let's say it >>> 6.3, which means that it is Win8.1 or WS2012R2, parsing "BuildLabEx" >>> string from the same hive will give you information about the platform >>> bitness. Next you need to go through inf files, and find "DriverVer" >>> string, like this one . taken from from vioscsi.inf >>> >>> DriverVer=08/01/2015,62.72.104.10800 >>> >>> This string contains build time and version stamps. The version stamp >>> looks as follow "62.72.104.10800" >>> where 62 means a target Windows kernel version multiplied by 10. In this >>> case it is 6.2 which means Win8 or WS2012 >>> 72 - the target host platform version multiplied bu 10 (was RHEL7.2) >>> 104 just a magic number, but it can be changed, don't make any >>> assumption based on this number. >>> 10800 our internal build number (build 108) multiplied by 100 >> >> Hi Vadim, >> >> I've almost finished implementing this, but I have a couple of >> technical questions: >> >> (1) How can we tell from the .inf file what architecture (x86 or >> amd64) the driver is for? There is a [Manufacturer] section which >> looks hopeful, eg: >> >> [Manufacturer] >> %RHEL% = RHEL,NTAMD64 >> >> but the contents are not very consistent across all the .inf files I >> have access to. > > Hi Richard, > > It should be consistent. We do specify target architecture (amd64 or > x86) when stamping inf/inx files. IIRC, qemupciserial.inf is the only > exception, but it goes without binaries. In any case, if you are going > to use existing distribution media, you can rely on the media layout - > for example, if "amd64" is a part of your current path - you are in > 64-bit directory. >> >> (2) If we have a directory containing multiple drivers, can we assume >> that if any .inf file found matches the guest OS, then all those >> drivers can be installed? So far this appears to be true. > Yes, we will never mix 32 and 64 bit drivers into the same directory. > I swear:) > >> If not >> then we have to start associating drivers with .inf files, which seems >> a bit complicated. >> >> (3) You write: >> >>> If you found an inf file with the matching minor OS (6 in our case) >>> version and matching or less but close minor version number (2 vs 3) >>> then you are in the right directory. >> >> When you say "close minor version number" is there a particular >> definition you have in mind? eg. minor or minor-1 is OK? Or do we >> have to consider all .inf files in totality and choose the nearest >> one? > Ideally, we should try finding the exact match. If not, we have to find > one with the same major version number and nearest minor number which is > smaller than the target one. For example, let's say we are looking for a > driver for Win8.1/WS2012R2, we know that both of them have kernel > version 6.3 . So, ideally we should to find inf file with the following > driver version string: > > DriverVer=XX/YY/ZZZZ,63.AA.BBB.CCCCC > > if we cannot find an inf file with such criteria, we should try finding > another one with the OS version 62 (which means that a driver was build > for kernel 6.2 Win8/WS2012 and technically should be compatible with > 6.3). So, we are looking for DriverVer which looks like this one: > DriverVer=XX/YY/ZZZZ,62.AA.BBB.CCCCC > > Still no luck - decrease the target OS version to 61 and repeat. > > For WDF drivers like balloon, vioserial, and rng you can go as far as > you can trying to find an appropriate driver. > > For miniport drivers like netkvm ( Yan, please confirm ), viostor and > vioscsi I wouldn't go too far. For example drivers designed to fork in > specific stacks at kernel version 5.1 (WinXP) can refuse working with > kernel 6.2 (Win8).
While NDIS miniport designed for NDIS 5.1 (XP) still can run on latest Windows, I wouldn’t do that. For NDIS 6.x (Windows 2008 and newer), we can use older drivers on new OS. But installing a driver for a newer OS on older OS might lead to driver miss-behaviour. > > However, Win10 will be a problem. At least as long as we do not release > virtio-win drivers built for this particular OS version, and keep using > drivers designed for Win8/WS2012 and Win8.1/WS2012R2 platforms. > Win10 has kernel version 10.0 (guys, who has Win10 RTM running - please > confirm). It used to be 6.4 for RC and Beta versions, but IIRC > Microsoft decided to change it to 10.0 for RTM and final release. > Microsoft promised that drivers designed for Win8/WS2012 and > Win8.1/WS2012R2 platforms will continue working, at least for the > nearest future. > > Vadim. > >> >> Rich.
_______________________________________________ Libguestfs mailing list [email protected] https://www.redhat.com/mailman/listinfo/libguestfs
