On 3/8/23 22:52, Richard W.M. Jones wrote:
> On Wed, Mar 08, 2023 at 08:05:35PM +0200, Andrey Drobyshev wrote:
>> During conversion we copy the necessary drivers to the directory
>> "%systemroot%\Drivers\Virtio", adding it to the DevicePath registry
>> value. As documented in [1], this should be enough for Windows to find
>> device drivers and successfully install them.
>>
>> However, it doesn't always happen. Commit 73e009c04 ("v2v: windows:
>> Document use of pnputil to install drivers.") describes such issues with
>> Win2k12R2. I'm seeing the same problem with Win2k16 and netkvm.sys
>> driver not being installed.
>>
>> That same commit 73e009c04 suggests adding a firstboot script invoking
>> pnputil at an early stage to install all the drivers we put into the
>> drivers store. So let's add such a script to make sure all the
>> necessary drivers are installed.
>>
>> [1]
>> https://learn.microsoft.com/en-us/windows-hardware/drivers/install/how-windows-selects-a-driver-for-a-device
>>
>> Signed-off-by: Andrey Drobyshev <[email protected]>
>> ---
>> convert/convert_windows.ml | 16 ++++++++++++++--
>> 1 file changed, 14 insertions(+), 2 deletions(-)
>>
>> diff --git a/convert/convert_windows.ml b/convert/convert_windows.ml
>> index 6bc2343b..e15a5e62 100644
>> --- a/convert/convert_windows.ml
>> +++ b/convert/convert_windows.ml
>> @@ -295,9 +295,11 @@ let convert (g : G.guestfs) _ inspect i_firmware
>> block_driver _ static_ips =
>> | Virt -> Virt
>>
>> and configure_firstboot () =
>> - (* Note that pnp_wait.exe must be the first firstboot script as it
>> - * suppresses PnP for all following scripts.
>> + (* Run the firstboot script with pnputil.exe before the one with
>> + * pnp_wait.exe as the latter suppresses PnP for all following scripts.
>> *)
>> + configure_pnputil_install ();
>> +
>> let tool_path = virt_tools_data_dir () // "pnp_wait.exe" in
>> if Sys.file_exists tool_path then
>> configure_wait_pnp tool_path
>> @@ -345,6 +347,16 @@ let convert (g : G.guestfs) _ inspect i_firmware
>> block_driver _ static_ips =
>> strkey name value
>> | None -> sprintf "reg delete \"%s\" /v %s /f" strkey name
>>
>> + and configure_pnputil_install () =
>> + let fb_script = "@echo off\n\
>> + \n\
>> + echo Wait for VirtIO drivers to be installed\n\
>> + %systemroot%\\Sysnative\\PnPutil -i -a \
>> + %systemroot%\\Drivers\\Virtio\\*.inf >\"%~dpn0.log\"
>> 2>&1\
>> + " in
>> + Firstboot.add_firstboot_script g inspect.i_root
>> + "pnputil install drivers" fb_script;
>> +
>
> I'm not sure I'm really qualified to comment on this, since Windows is
> crazy. I guess the worst this can do is fail to run, but that won't
> stop anything else from happening.
>
> Note that firstboot scripts already do logging, so I don't believe
> writing to a separate log file is needed here. All the output from
> all firstboot scripts should go to
> C:\Program Files\Guestfs\Firstboot\log.txt:
>
> https://github.com/libguestfs/libguestfs-common/blob/7acf991a25b3fd625eb1ff1fbd8dc9fedf245942/mlcustomize/firstboot.ml#L276
Right, but apart from having the log common for all firstboot scripts,
some of them also utilise separate log files in scripts-done directory,
e.g.:
https://github.com/libguestfs/virt-v2v/blob/cb792fef27f/convert/convert_windows.ml#L381
https://github.com/libguestfs/virt-v2v/blob/cb792fef27f/convert/convert_windows.ml#L168
So I did the same considering that pnputil's output is relatively long.
All in all, if there're no other concerns, can we give this script a go?
>
> Rich.
>
_______________________________________________
Libguestfs mailing list
[email protected]
https://listman.redhat.com/mailman/listinfo/libguestfs