Hi Francis, I just tried to update Libreboot to the latest release, but I didn't succeed.
I am currently using the 20141015 release. After I modified the "x60_usqwerty_vesafb.rom" image according to my own requirements, I experienced the following: - found no "builddeps-flashrom" script in the main directory of this release (libreboot_bin/), and noticed that binaries already exist for my platform in flashrom/i686/ → So I did nothing at this step. - then I did this: ./flash work/x60_usqwerty_vesafb-mk2.rom (which points to my modified ROM image) - and got this back: 1. the content of the "flash" script (not the binary) is printed in the terminal from line 25 to bottom, which is expected, from "set -v", I guess. 2. then this: -----CUT----- echo $path flashrom v0.9.7-r1858 on Linux 3.14.29-gnu-1-lts (i686) flashrom is free software, get the source code at http://www.flashrom.org Calibrating delay loop... OK. coreboot table found at 0xbf6bd000. Active config mode, unknown reg 0x20 ID: ea. Please send the output of "flashrom -V -p internal" to [email protected] with W836xx: your board name: flashrom -V as the subject to help us finish support for your Super I/O. Thanks. Found chipset "Intel ICH7M". Enabling flash write... OK. Found Macronix flash chip "MX25L1605D/MX25L1608D/MX25L1673E" (2048 kB, SPI) mapped at physical address 0xffe00000. This coreboot image (LENOVO:ThinkPad X60) does not appear to be correct for the detected mainboard (Lenovo:ThinkPad X60 / X60s / X60t). Aborting. You can override this with -p internal:boardmismatch=force. -----CUT----- Does this come from the case difference between "LENOVO" (in the coreboot image) and "Lenovo" (the detected maniboard)? What did I miss? I have my own flashrom that I got from the Parabola repository, but I didn't dare to use it instead of the one which is included in this Libreboot release. Many thanks in anticipation for your help. Robert
pgpI8d1EuCKbr.pgp
Description: PGP signature
