-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Do you have a way to get debugging info from the coreboot log? (EHCI Debug, spkmodem, etc)
On 01/04/15 21:01, Bella Riosa wrote: > Hello, > > i tried to flash my T400 today with the latest released version > (20150208) and the latest snapshot (20150401). > > Unfortunately it wasn't successful. Both versions had the same > symptoms. The flashing went well, but the new BIOS didn't boot. The > LCD screen was flickering a little bit on startup and then went > black (with backlight on). An external Monitor attached to the > VGA-Port didn't work either, saying some- thing about a wrong > signal. > > After i reflashed the backup of the original BIOS everything worked > again. > > i used the following command to flash the rom: > > # flashrom -p linux_spi:dev=/dev/spidev0.0,spispeed=512 -V -w \ > libreboot_bin/bin/x200_8mb/x200_8mb_usqwerty_vesafb.rom > > BTW, my programmer is a RaspPi. > > After the reflash of the backup i made several logs as suggested by > fchmmr at IRC (many thanks for the help, btw) > > The original Bios version is 1.2 (7UET50WW) from 2008-10-03 The EC > version is 1.01 and my CPU is a P8600. I'm using a samsung 2GB > SODIMM (PC3-8500S-07-10-F2) but tried a faster one from Hynux, too > (10600S-9-11-B2) > > I hope i didn't forget any critical infos. > -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQEcBAEBAgAGBQJVHpnXAAoJEP9Ft0z50c+U/7IH/jrBrOKhBnIbs0xhLdyTzgco Zvk/kWp1qmEZZG48eJ/joDYOvthquH4h8JfvfZYed+z4/B0rLpT/tVufwBRATIU8 yFjUztYqNA0S7pSDSzUuqxrZ4FB+V5v0VGGOAhl/WfAaFqRirEtk82CoZV5ixUPi fLjvwbg5dmtk0X+OuIjwGWmkRpesHXRfvptQxoS3Dsa4jKL29BVqYZF5NJzpA/uO 3JHGWCxHWSEQlXLK6GKGd7Qwvz//JGJg+4eV5jZKe5yObqBcdK+h/V/59HFDvZZn Q47IzkaUDwVzu4Cn1JRXdIUV9+LpJLJtb+k6SqlVs/vFxLjA8ugC5g05AruR4jU= =yjsk -----END PGP SIGNATURE-----
