-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Come to the IRC channel
On 05/06/15 13:37, [email protected] wrote: > Is there anyone willing to help me please? > > ---------- Forwarded message ---------- From: [email protected] > <[email protected]> Date: 2015-05-26 22:04 GMT+00:00 Subject: > T400 SOIC-16 flashing fails To: [email protected] > > > Hello all, > > I followed all instructions on > http://libreboot.org/docs/install/bbb_setup.html#bbb_access > http://libreboot.org/docs/install/t400_external.html including > adding pins 1 and 9 to the 3.3 V power supply, but I ran into an > error I can't resolve, even after triple-checking the instructions > step by step, the chip is obviously not recognized: > > ---snip--- root@beaglebone:~/libreboot_util/flashrom/armv7l# > ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 -r > factory.rom flashrom v0.9.8-unknown on Linux 3.8.13-bone47 > (armv7l) flashrom is free software, get the source code at > http://www.flashrom.org > > Calibrating delay loop... OK. Found Generic flash chip "unknown SPI > chip (RDID)" (0 kB, SPI) on linux_spi. === This flash part has > status NOT WORKING for operations: PROBE READ ERASE WRITE The test > status of this chip may have been updated in the latest > development version of flashrom. If you are running the latest > development version, please email a report to [email protected] > if any of the above operations work correctly for you with this > flash chip. Please include the flashrom log file for all operations > you tested (see the man page for details), and mention which > mainboard or programmer you tested in the subject line. Thanks for > your help! Read is not working on this chip. Aborting. ---snap--- > > I don't have another Thinkpad that would work with libreboot, so I > can't check with other hardware weather the chip is the problem. It > still booted before I dissassembled the laptop, so it's unlikely. > > Another question is how many amps do I need for the 3.3V power > source for chip (I used an lab power supply which I bought just to > flash this chip =)? > > Help is much appreciated. > -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQEcBAEBAgAGBQJVcaNvAAoJEP9Ft0z50c+UlaIIAJeTsQJjGEKqCOAZxW7ZC8rD WpYlzqiVUKrlyD6ALKEGMMHuJGw7pIYwjoa22cn6QfECLCtyCE/nAiMuKon0QyQo KAR2HUIUwD0Qx3BKe2FXLEY7wYVDStzDcRnAtqApMK08rUtd3+tSN6JipWJ5KGsv CF360AgnkNzF0j2/CSiaHwwFkNORfr/pYRjc+pIF+7BX1n4Zy0kdhyRKMatMCTI3 3UFawuUuPZ4Qr8whXAfMErDh/s23k8pCpo7Crqv3PC/XwsX+Ya7dEd6yVZJoCog0 HTzXZ5lnh3zdz4hICmkL8Mis124fWxLuXQCepmqVCeynqvSN6L0cxTlb7Sw6Vx8= =u6kU -----END PGP SIGNATURE-----
